| GPC-20741 |
Fixed an issue where the GlobalProtect app intermittently disconnected
from the gateway when the user was using the embedded browser for SAML
authentication.
|
| GPC-20640 |
Fixed an issue where the GP App graphical interface on macOS does not
close on pressing the ESC key.
|
| GPC-20585 |
Fixed an issue where the GlobalProtect app could not connect to the
GlobalProtect portal when configured with certificate authentication and
SAML authentication using an embedded browser
|
| GPC-20571 |
Fixed an issue where the Report an Issue option was not visible in the
GlobalProtect app version 6.2.3.
|
| GPC-20542 |
Fixed an issue where, when the GlobalProtect app was installed on
Windows devices, the GlobalProtect logs did not display the username
correctly.
|
| GPC-20537 |
Fixed an issue where the Login page got redirected twice and opened two
separate tabs for GlobalProtect portal and gateway, when the user tried
to connect the GlobalProtect app using the SAML authentication method.
|
| GPC-20531 |
Fixed an issue where, when the user was using Remote Desktop with
GlobalProtect, the RDP sessions got disconnected because the
GlobalProtect on RDP station got disconnected with a grace period end
message.
|
| GPC-20527 |
Fixed an issue where the Conditional Connect method configured for the
GlobalProtect app did not work as expected when the user shifted from
external network (home) to an internal network (office). Users had to
reboot the system to resolve this issue.
|
| GPC-20514 |
Fixed an issue where the remote users using GlobalProtect with Connect
Before Logon (CBL) were unable to reset their password when using the
app with an embedded browser.
|
| GPC-20455 |
Fixed an issue where the GlobalProtect app intermittently got stuck on
the 'Connecting' status when the computer resumed from sleep and a new
authentication was needed or authentication cookies had expired.
|
| GPC-20445 |
Fixed an issue where the GlobalProtect app got stuck in Connecting state
after upgrading from PAN-OS 10.1.11-h5 version to PAN-OS 10.1.13
|
| GPC-20444 |
Fixed an issue where, when the GlobalProtect app was used with the SAML
authentication method, the app displayed two pop-up messages; one with a
successful authentication message and the other with an authentication
failure message.
|
| GPC-20426 |
Fixed an issue where a new HIP report was not generated when the user
disabled AV on an end-user device.
|
| GPC-20381 |
Fixed an issue where the Windows defender Real Time Protection state and
agent version is incorrectly identified in GlobalProtect app version
6.0.8 and 6.2.3.
|
| GPC-20378 |
Fixed an issue where the GlobalProtect app was used with the SAML
authentication method with the embedded browser, the app got stuck while
redirecting to the SAML authentication page.
|
| GPC-20374 |
Fixed an issue where users were unable to connect to GlobalProtect if
they accidentally clicked decline on the Terms of Service page.
|
| GPC-20370 |
Fixed an issue where the Real Time Protection state from SentinelOne was
displayed as true even when the app was disabled.
|
| GPC-20366 |
Fixed an issue where, when the GlobalProtect app was installed on
Windows devices and the users tried to authenticate to the app, the
screen displayed both authentication success and failed message even
when the authentication was successful.
|
| GPC-20320 |
GlobalProtect unable to authenticate with SAML IdP using embedded
browser (webview2) when "Enforce GlobalProtect for Network Access" is
enabled
|
| GPC-20279 |
Fixed an issue where users were presented with suggested user names
during SAML authentication after upgrading to GlobalProtect 6.2.3.
|
| GPC-20263 |
Fixed an issue where the correct label was not associated with the
GlobalProtect icon so voice over was unable to read the icon name.
|
| GPC-20262 |
Fixed an issue where users were unable to select the GlobalProtect icon
from the status bar on macOS.
|
| GPC-20243 |
Fixed an issue where, when the GlobalProtect app was used with an
embedded browser, the browser displayed ‘can't reach page’ due to a
Windows filter driver issue.
|
| GPC-20242 |
Fixed an issue where the GlobalProtect app displayed gibberish text on
the app.
|
| GPC-20241 |
Resolved an issue where the GlobalProtect app did not detect HIP
information for HP Wolf Security software.
|
| GPC-20178 |
Resolved an issue where the Certificate Revocation List was sent to a
URI that was not an exact match with the URI in the certificate.
|
| GPC-20163 |
Fixed an issue where the GlobalProtect app was unable to connect to the
gateway via IPv6.
|
| GPC-20162 |
Fixed an issue where the GlobalProtect enforcer blocked some DHCPv6
packets on Windows computers.
|
| GPC-20157 |
Fixed an issue where the gateway location was not correctly displayed in
the Connections panel.
|
| GPC-20143 |
Fixed an issue where the user was redirected to the Authentication page
twice on the default browser for both portal and gateway authentication
when SAML was configured.
|
| GPC-20091 |
Fixed an issue where pre-logon failed when the computer was rebooted,
when the machine store had an expired and active certificate.
|
| GPC-20080 |
Fixed an issue where the GlobalProtect logs displayed different event
messages for Windows and macOS devices when the
Allow User to Disable GlobalProtect App
was set to Allow with Passcode for the
GlobalProtect app.
|
| GPC-20060 |
Fixed an issue where it was possible for the GlobalProtect enforcer to
be disabled when there was a network change during portal
authentication.
|
| GPC-20040 |
Resolved an issue where GlobalProtect did not re-check for internal
gateways when using cached portal configuration and an external network
was previously detected.
|
| GPC-20028 |
Fixed an issue where macOS users, despite having 'Allow User to Change
Portal Address' set to No, were able to choose a different portal from
the existing list.
|
| GPC-20005 |
Fixed an issue where, when the GlobalProtect app was installed on
Windows devices, users were able to select the manual gateway and
connect to the app even when the regional or global fall back gateway
was not configured.
|
| GPC-20004 |
Fixed an issue where both certificates with and without the specified
OID were incorrectly being selected as potential machine certificates.
|
| GPC-20003 |
Fixed an issue where GlobalProtect users with certificates were unable
to connect a gateway on version 6.0.9.
|
| GPC-19991 |
Fixed an issue where client certificate authentication between embedded
browser and IdP (SAML) failed.
|
| GPC-19972 |
Fixed an issue where users were unable to connect to Prisma Access after
a break and had to reboot their computer.
|
| GPC-19961 |
Fixed an issue where the hamburger menu on the GlobalProtect app was
disabled and end users were unable to click on the Report an Issue
option when the GlobalProtect app was disabled in Alway-On mode.
|
| GPC-19930 |
Fixed an issue where the HIP check did not detect the BitLocker disk
encryption correctly during windows update, causing the device to fail
the HIP check.
|
| GPC-19918 |
Fixed an issue where, when the GlobalProtect app was installed on
devices running macOS, the HIP check did not detect CrowdStrike
antivirus software correctly, causing the device to fail the HIP check.
|
| GPC-19889 |
Fixed an issue where, when the GlobalProtect app was installed on
Windows machine and Connect Before Logon (CBL) was configured for the
app, the app did not start properly when the user logged on to the
device.
|
| GPC-19878 |
Fixed an issue where a typo in the IP address exclusion list was not
marked as invalid by the GlobalProtect enforcer, resulting in all IP
addresses in the range being allowed.
|
| GPC-19833 |
Fixed an issue where, when the GlobalProtect app was installed on
Windows devices, the Smart card (Yubikey) authentication did not work
when the device woke up from sleep mode.
|
| GPC-19829 |
Fixed an issue where the manual gateway login failed when users tried to
login using their user name and password.
|
| GPC-19751 |
Fixed an issue where the programmatic and visual label for the
GlobalProtect form field was not announced.
|
| GPC-19740 |
Fixed an issue where, when the GlobalProtect app was installed on VDI
devices running Windows OS, the GlobalProtect app got disconnected
without displaying any message.
|
| GPC-19696 |
Fixed an issue where, when the GlobalProtect app was installed on
endpoints running macOS and the split tunnel was configured based on the
application for Zoom, users were unable to access any sites when the
split tunnel was disabled for Zoom and moved to full tunnel.
|
| GPC-19660 |
Fixed an issue where the "Check for Updates" button on GlobalProtect app
version 6.2.2 did not work when the activated GlobalProtect version on
the firewall was earlier than 6.2.2.
|
| GPC-19652 |
Fixed an issue where, when the GlobalProtect app was installed on
devices running macOS, users were unable to access the applications and
websites when the app got disconnected and reconnected while switching
the medium from wired to wireless and vice versa.
|
| GPC-19629 |
Fixed an issue where, when the GlobalProtect app was installed on
devices running macOS, the split tunnel feature did not work as expected
when Jamf was used to push the configuration policy rules.
|
| GPC-19610 |
Fixed an issue where, when the GlobalProtect app was installed on
devices running macOS, end users were not prompted to enter a password
and the app got stuck in Restoring VPN connection state until the cookie
was deleted.
|
| GPC-19603 |
Fixed an issue where the GlobalProtect app displayed a generic SAML
login page and not the actual login page for authentication and the
connection was not established when cached portal configuration was
used.
|
| GPC-19436 |
Fixed an issue where the screen reader could not identify the image in
the GlobalProtect app tray on the devices running macOS causing
accessibility issues.
|
| GPC-19532 |
Fixed an issue where, after upgrading GlobalProtect via the portal
prompt, all traffic except DNS was being dropped because the new
GlobalProtect extensions were not being loaded.
|
| GPC-19373 |
Fixed an issue where the HIP remediation pop up is displayed even when
the user is disconnected.
|
| GPC-19373 |
Fixed an issue where the HIP remediation pop up is displayed even when
the user is disconnected.
|
| GPC-19336 |
Fixed an issue where the ADEM portal did not display user information
such as User-ID when the ADEM portal was changed from on-premises to
Prisma Access.
|
| GPC-19279 |
Fixed an issue where the GlobalProtect client was not displayed during
the upgrade from version 6.0.5-35 to 6.0.8-601.
|
| GPC-19237 |
Fixed an issue where the GlobalProtect app did not disconnect when the
user used the Disable option on the hamburger menu. The tunnel was still
up and connected even when the user disconnected the GlobalProtect app.
|
| GPC-19138 |
Resolved an issue where the exclude for google application was not
working for users.
|
| GPC-19098 |
Resolved an issue where pre-logon setup was not working when
GlobalProtect 6.2.1 was deployed via Microsoft Intune.
|
| GPC-19043 |
Fixed an issue where the GlobalProtect app did not add all routes
configured in the access route to the route table.
|
| GPC-19011 |
Fixed an issue where the GlobalProtect app on a Windows computer was
unable to connect to an IPv4 gateway behind a NAT64 device.
|
| GPC-18933 |
Fixed an issue where the GlobalProtect HIP check incorrectly detected
Real Time Protection for Cortex XDR, which caused the device to fail the
HIP check.
|
| GPC-18778 |
Resolved an issue where devices supporting Modern Standby (Microsoft
Learn) crashed when they entered sleep mode while the VPN plugin had an
active connection and was sending data over its tunnel.
|
| GPC-18728 |
Fixed an issue where the ‘I Agree’ option on the GlobalProtect app
Welcome page did not work as expected when the user selected the option
using a keyboard.
|
| GPC-18702 |
Fixed an issue where, when the GlobalProtect app was installed on
Windows devices, the “Allow Manually upgrade failed when the user tried
to upgrade the GlobalProtect app version from 6.0.5 to 6.0.7
|
| GPC-18625 |
Fixed an issue where the Zoom app intermittently stopped connecting on
macOS and displayed an error message.
|
| GPC-18385 |
Fixed an issue where, when the GlobalProtect app got reconnected after
the user changed the network access from Wi-Fi (IPv4 only) to Ethernet
connection (Dual Stack IPv4 + IPv6), the IPv6 ip-user mapping was
missing on the firewall and only IPv6 ip-user mapping was available. The
user had to refresh the connection to resolve this issue.
|
| GPC-15750 |
Fixed an issue where a hyperlink in a HIP notification opened in the
GPO-disabled Internet Explorer 11 browser instead of the default
browser.
|
| GPC-14714 |
Fixed an error where the screen reader does the announce the status when
the radio button is selected for Network configuration, Routing table,
Sockets, and "Logs".
|