Add 9.0 issues data
This commit is contained in:
@@ -0,0 +1,193 @@
|
||||
---
|
||||
type: Addressed
|
||||
product: PAN-OS
|
||||
version: 9.0.2
|
||||
source: common-crawl
|
||||
crawl: CC-MAIN-2026-12
|
||||
---
|
||||
|
||||
## WF500-5023
|
||||
|
||||
Fixed an issue on WF-500 appliances where the cluster service took longer than expected to start due to a large number of queued sample data.
|
||||
|
||||
## WF500-5022
|
||||
|
||||
Fixed an issue where a non-functioning CLI command was removed from WF-500 appliances.
|
||||
|
||||
## WF500-4974
|
||||
|
||||
Fixed an issue on a WF-500 appliance where the static analysis results displayed in the PDF report but did not display in the WildFire® analysis summary of the web interface.
|
||||
|
||||
## WF500-4844
|
||||
|
||||
Fixed an issue on WildFire appliance clusters where the passive-controller responded with the incorrect Common Name (CN) in the certificate, which caused the registration to fail.
|
||||
|
||||
## WF500-4838
|
||||
|
||||
Fixed an intermittent issue on a WF-500 appliance where WildFire reports took longer than expected to generate, which caused the task to automatically timeout.
|
||||
|
||||
## WF500-4784
|
||||
|
||||
Fixed an issue on a WF-500 appliance where during a reboot, the following error message displayed: FATAL: module nbd not found.
|
||||
|
||||
## WF500-4743
|
||||
|
||||
Fixed an intermittent issue on a WF-500 appliance where the CLI command debug wildfire reset global-database fix became unresponsive.
|
||||
|
||||
## PAN-118065
|
||||
|
||||
```caveat
|
||||
M-Series Panorama™ management servers in Management Only mode
|
||||
```
|
||||
|
||||
When you delete the local Log Collector (**Panorama** > **Managed Collectors**), it disables the 1/1 ethernet interface in the Panorama configuration as expected but the interface still displays as Up when you execute the show interface all command in the CLI after you commit.
|
||||
|
||||
**Workaround:**Disable the 1/1 ethernet interface before you delete the local log collector and then commit the configuration change.
|
||||
|
||||
## PAN-116919
|
||||
|
||||
```caveat
|
||||
Microsoft Azure only
|
||||
```
|
||||
|
||||
Fixed an issue where the firewall dropped packets passing through IPSec tunnels if you enabled jumbo frames (**Device** > **Setup** > **Session** > **Session Settings**).
|
||||
|
||||
## PAN-116658
|
||||
|
||||
Fixed a rare issue where the firewall sent HTTP/2 DATA frames with incorrect padding byte lengths, which caused software buffer corruption and a process (all_pktproc) to stop responding.
|
||||
|
||||
## PAN-116316
|
||||
|
||||
Fixed an issue where RTP and RTCP predict sessions failed, which caused the firewall to stop processing RTSP-based video streaming.
|
||||
|
||||
## PAN-116084
|
||||
|
||||
Fixed an issue where a VM-Series firewall on Microsoft Azure deployed using MMAP dropped traffic when the firewall was experiencing heavy traffic.
|
||||
|
||||
## PAN-115592
|
||||
|
||||
Fixed an issue where the firewall rebooted due to a plugin memory leak.
|
||||
|
||||
## PAN-115591
|
||||
|
||||
Fixed an issue where the snmpd process was leaking memory when polling for global counters.
|
||||
|
||||
## PAN-114984
|
||||
|
||||
Fixed OpenSSL vulnerability CVE-2019-1559, see [PAN-SA-2019-0039](https://securityadvisories.paloaltonetworks.com/Home/Detail/202) for details.
|
||||
|
||||
## PAN-114893
|
||||
|
||||
Fixed an issue where a context switch from Panorama to a firewall did not respond as expected when a web browser was used.
|
||||
|
||||
## PAN-114804
|
||||
|
||||
Fixed an issue where a configuration change resets to "default" when you conducted a search in the Categories (**Objects** > **URL Filtering** > **Categories**) web interface.
|
||||
|
||||
## PAN-114601
|
||||
|
||||
Fixed an issue where the Allow List (**Device** > **Setup** > **Authentication Setting** > **<authentication profile - name>** > **Authentication**) did not update after you added new users to a group in the Active Directory.
|
||||
|
||||
## PAN-114255
|
||||
|
||||
Fixed an issue where Bidirectional Forwarding Detection (BFD) went down temporarily during a commit or EDL refresh if you configured a large value for the BFD Hold Time.
|
||||
|
||||
## PAN-114003
|
||||
|
||||
Fixed an issue on a Panorama management server running PAN-OS 9.0 where a context switch to firewalls did not respond.
|
||||
|
||||
## PAN-113829
|
||||
|
||||
Fixed an issue where, after you upgraded the firewall to PAN-OS® 9.0, a firewall configured from "none" to "allow" in the custom URL category reverted to "none" after a commit.
|
||||
|
||||
## PAN-113692
|
||||
|
||||
Fixed an intermittent issue on a firewall in a high availability (HA) active/passive configuration where five minutes after a failover test IP routes disappeared, which caused traffic interruptions.
|
||||
|
||||
## PAN-113608
|
||||
|
||||
Fixed an issue on a firewall with packet capture (pcap) enabled where the log receiver stopped responding when larger than expected packets were received.
|
||||
|
||||
## PAN-113414
|
||||
|
||||
Fixed an issue where the User-ID™ (useridd) process stopped responding.
|
||||
|
||||
## PAN-112815
|
||||
|
||||
Fixed an issue on a firewall in an HA active/passive configuration where a process (useridd) did not respond to the alternate user attribute (**Device** > **User Identification** > **Group Mapping Settings** > **<group mapping-name>** > **User and Group Attributes**) on the passive firewall during a restart.
|
||||
|
||||
## PAN-112814
|
||||
|
||||
Fixed an issue where H.323-based calls lost audio because the predicted H.245 session was not converted to Active status, which caused the firewall to drop the H.245 traffic.
|
||||
|
||||
## PAN-112729
|
||||
|
||||
Fixed an issue on Panorama M-Series and virtual appliances where Decrypted Sessions Info (**Panorama** > **Managed Devices** > **Health** > **All Devices** > **<device-name>** > **Sessions**) did not display as expected for VM-Series firewalls.
|
||||
|
||||
## PAN-112699
|
||||
|
||||
```caveat
|
||||
VM-Series firewall on AWS running on a C5 or M5 instance only
|
||||
```
|
||||
|
||||
Fixed an issue where you were unable use the mgmt-interface-swap command to [swap the interfaces](https://docs.paloaltonetworks.com/vm-series/9-0/vm-series-deployment/set-up-the-vm-series-firewall-on-aws/about-the-vm-series-firewall-on-aws/management-interface-mapping-for-use-with-amazon-elb.html) for deploying a VM-Series firewall behind a web load balancer (such as AWS ALB or Classic ELB).
|
||||
|
||||
## PAN-112626
|
||||
|
||||
Fixed an issue where a new DNS Security subscription was not available on your VM-Series firewall after you upgraded to a PAN-OS 9.0® release with a PAYG Bundle 2 license.
|
||||
|
||||
## PAN-112445
|
||||
|
||||
Fixed an issue on a firewall in an HA active/passive configuration where a race condition caused the firewall to stop responding after an HA1 link flap.
|
||||
|
||||
## PAN-112340
|
||||
|
||||
Fixed an issue with performance, including high CPU usage, that occurred when you enabled URL Filtering without enabling Threat Prevention in an environment that processes a large number (thousands) of URL look-ups per second per dataplane.
|
||||
|
||||
## PAN-112194
|
||||
|
||||
Fixed an issue where packet buffers did not release GlobalProtect™ clientless VPN packets, which caused the firewall to stop responding.
|
||||
|
||||
## PAN-111679
|
||||
|
||||
Fixed an issue where URL filtering profiles were being incorrectly applied to security policies during a commit.
|
||||
|
||||
## PAN-111553
|
||||
|
||||
Fixed an issue on the Panorama management server where the **Include Device and Network Templates** setting (**Commit** > **Push to Devices** > **Edit Selections** or **Commit** > **Commit and Push** > **Edit Selections**) was disabled by default and caused your push attempts to fail. With this fix, your push will **Include Device and Network Templates** by default.
|
||||
|
||||
## PAN-111540
|
||||
|
||||
Fixed an issue on PA-5200 Series firewalls where the dataplane stopped responding when the session table was full.
|
||||
|
||||
## PAN-111251
|
||||
|
||||
Fixed an issue where administrators were unable to use the CLI to enable or disable DNS Rewrite under a Destination NAT policy rule (they were able to execute the command but the firewall did not implement the change).
|
||||
|
||||
## PAN-110390
|
||||
|
||||
Fixed an issue on PA-7000 Series firewalls where invalid filters caused the device management server to stop responding when you generated a database (DB) report from a remote firewall.
|
||||
|
||||
## PAN-110273
|
||||
|
||||
Fixed an issue where you were unable to establish OSPF neighborship when an OSPF routing protocol was configured with MD5 authentication and one of the firewalls was restarted.
|
||||
|
||||
## PAN-109672
|
||||
|
||||
Fixed an issue on a VM-Series firewall in an HA active/passive configuration where the passive firewall received buffered packets while in an idle state when the data plane development kit (DPDK) is enabled.
|
||||
|
||||
## PAN-109344
|
||||
|
||||
Fixed an issue where service objects did not import into Panorama when you configured them identically but with different names.
|
||||
|
||||
## PAN-108374
|
||||
|
||||
Fixed an issue on GlobalProtect where you were unable to authenticate when the domain name included the ampersand ( "&" ) character.
|
||||
|
||||
## PAN-106518
|
||||
|
||||
Fixed an issue on Panorama M-Series and virtual appliances where predefined DHCP options did not accept template variables when you configured a DHCP server for a template.
|
||||
|
||||
## PAN-101341
|
||||
|
||||
Fixed an issue where administrators configured with Device Group and Template Admin type were unable to perform a global search and returned the following message: Unauthorized request.
|
||||
Reference in New Issue
Block a user