---
type: Known
product: PAN-OS
version: 11.1.1
---

## PAN-304756

```caveat
This issue is now resolved. See PAN-OS 11.1.13-h1 Addressed Issues.
```

After you disable the shared optimization feature in Panorama, ensure that you perform a full configuration push to all managed multi-vsys devices to re-establish a baseline. Failure to include every device group associated with the multi-vsys device during this push might result in incomplete or inconsistent configurations across virtual systems.

## PAN-298505

```caveat
This issue is now resolved. See PAN-OS 11.1.6-h20 Addressed Issues, PAN-OS 11.1.10-h7 Addressed Issues, and PAN-OS 11.1.12 Addressed Issues
```

After upgrading multi-vsys firewalls, the sequence of the virtual system IDs (vsys ID) changes causing auto-commit failures with validation errors. This occurs when the multi-vsys firewall has virtual systems managed by Panorama, and the vsys ID sequence breaks when unused virtual systems are deleted and the changes are pushed to the firewall.

## PAN-294179

```caveat
This issue is now resolved. See PAN-OS 11.1.6-h17 Addressed Issues.
```

On the**Panorama Config Audit** page, some commit versions might display incorrect or missing data. Fields such as, **COMMITTED BY**, **COMMIT DATE**, and**OBJECT CHANGES** might not be visible for some commit versions. Sometimes, commit versions can disappear after a refresh and the commit description field might display corrupted characters.

## PAN-291288

An active firewall might unexpectedly reboot due to a pan_task crash caused by a page allocation failure. This issue is observed after a period of runtime with traffic and telemetry collection.

## PAN-290088

```caveat
This issue is now resolved. See PAN-OS 11.1.11 Addressed Issues
```

When pushing configurations from Panorama to a firewall, a memory leak might occur in the firewall's configd process, particularly when the configurations contain shared policies. Each configuration push causes the configd process to consume additional memory that is not released after the commit completes.

## PAN-289383

```caveat
PA-800 series firewalls only
```

Upgrading firewalls to PAN-OS 11.0 or later causes SFP ports to go non-operational when the firewall uses forced port mode and the connected peer device operates without auto-negotiation.

**Workaround:** Enable auto-negotiation on the connected peer firewall.

## PAN-288097

```caveat
This issue is now resolved. See PAN-OS 11.1.11 Addressed Issues
```

Routed process may stop responding after changing MTU or any link parameters when OSPF and PIM are enabled on the same interface.

## PAN-286231

```caveat
This issue is now resolved. See PAN-OS 11.1.11 Addressed Issues
```

When performing a partial **Commit and Push** on Panorama, there is a risk that unintended configuration changes might be pushed to a firewall.

This issue is more likely to occur in the following scenarios:

- When you run **Commit and Push** operations as a single action.
- When you trigger multiple parallel commit-all jobs at the same time.
- Device groups and templates have different configuration synchronization versions.

**Workaround:** Perform one of the following steps:

- Perform commit and push as two separate, sequential steps.
- Perform a full push instead of selective push.

## PAN-285894

If the Preserve Pre-NAT feature is enabled, dataplane crashes may occur, which could result in firewall reboots.

**Workaround:** Disable the Preserve Pre-NAT feature using the `set deviceconfig setting preserve-prenat-feature no` CLI command.

## PAN-283429

When you use custom certificates for the connection between Panorama and a log collector, the automated renewal for the predefined ElasticSearch certificates gets disrupted.

**Workaround**: Remove the custom certificates before the ElasticSearch certificates expire. This allows the system to correctly identify and renew the predefined ElasticSearch certificates. After the renewal is complete, re-install the custom certificates.

## PAN-281885

When exporting and importing the CSV file, the hash values of pre-shared key (PSK) variables set at template and template stack levels inconsistently change, resulting in both variables displaying the same hash value.

## PAN-280532

```caveat
This issue is now resolved. See PAN-OS 11.1.10 Addressed Issues.
```

When you use a single syslog server over TCP for log forwarding, and the connectivity to the syslog server breaks, syslog forwarding does not resume even after the connectivity to the server restores.

**Workaround:** Performing one of the following tasks:

- Reboot the firewall.
- Temporarily, configure syslog to use UDP, commit the configuration, revert to TCP, and then commit.

## PAN-280471

When applying filters or searching for logs in the **Panorama** > **Monitor** > **Logs**section, you might experience slow performance.

## PAN-279415

```caveat
This issue is now resolved. See PAN-OS 11.1.11 Addressed Issues
```

Service routes configured for a data plane interface might incorrectly route traffic through the management plane interface instead. This issue impacts Syslog and CRL status traffic when the service route lacks a specific destination custom service route.

## PAN-278296

The system MAC address of the aggregate interface is the same on both the active and the passive devices, causing some packets to be sent incorrectly to the passive device. This is causing the AE interface on the active firewall to not come up.

## PAN-277417

```caveat
This issue is now resolved. See PAN-OS 11.1.9 Addressed Issues.
```

Memory leak issues can occur during the parsing of server certificates used for SSL Inbound Inspection, preventing the firewall from completing inspection.

## PAN-277034

```caveat
This issue is now resolved. See PAN-OS 11.1.10-h5 Addressed Issuesand PAN-OS 11.1.6-h19 Addressed Issues
```

WildFire reports might not fully display or be downloadable because some static resources fail to load.

## PAN-275601

```caveat
This issue is now resolved. See PAN-OS 11.1.10 Addressed Issues
```

When Panorama is not internet-connected and you try to upload images to the managed firewalls by using the **Validate** option, the upload fails with the following error: `Failed to create multi-upload job. No valid software deploy targets found.`

## PAN-273300

```caveat
This issue is now resolved. See PAN-OS 11.1.6-h1 Addressed Issues
```

When upgrading Panorama from PAN-OS 10.2 or PAN-OS 11.0 to PAN-OS 11.1 or a later release, Panorama fails to upgrade if it is operating within a Collector Group. The following error appears:`Error: Traceback (most recent call last):File "/opt/panrepo/releases/<PANOS release version>/validate"... (min ([dts['min'] for dts in 10g_type_intv_dir.values() if dts|'min']])-strftime ('%Y-%m-%d'),`

## PAN-263987

```caveat
This issue is now resolved. See PAN-OS 11.1.4-h4 Addressed Issues.
```

When a NAT traversal (NAT-T or UDP encapsulation) IPSec tunnel is terminated on a Palo Alto Networks firewall and the NAT rule applied to the NAT-T IPSec tunnel is also on the same firewall, then the data traffic flowing through the NAT-T IPSec tunnel can't be NATed correctly.

## PAN-262556

The ElasticSearch cluster health status might continue to remain yellow for an extended period after upgrading to PAN-OS 11.1.1.

## PAN-262287

Dereferencing a NULL pointer that occurs might cause pan_task processes to crash.

## PAN-260851

From the NGFW or Panorama CLI, you can override the existing application tag even if Disable Override is enabled for the application (**Objects** > **Applications**) tag.

## PAN-259769

```caveat
This issue is now resolved. See PAN-OS 11.1.5 Addressed Issues.
```

GlobalProtect portal is not accessible via a web browser and the app displays the error `ERR_EMPTY_RESPONSE`.

## PAN-257615

```caveat
This issue is now resolved. See PAN-OS 11.1.2-h9 Addressed Issues.
```

The Panorama web interface intermittently displays logs or fails to display logs completely.

## PAN-250062

```caveat
This issue is now resolved. See PAN-OS 11.1.4-h4 Addressed Issues.
```

Device telemetry might fail at configured intervals due to bundle generation issues.

## PAN-243951

```caveat
This issue is now resolved. See PAN-OS 11.1.2-h3 Addressed Issues
```

On the Panorama management sever in an active/passive High Availability (HA) configuration, managed devices (**Panorama** > **Managed Devices** > **Summary**) display as `out-of-sync` on the passive HA peer when configuration changes are made to the SD-WAN (**Panorama** > **SD-WAN**) configuration on the active HA peer.

**Workaround:** Manually synchronize the Panorama HA peers.

1. Log in to the [Panorama web interface](https://docs.paloaltonetworks.com/panorama/11-1/panorama-admin/set-up-panorama/access-and-navigate-panorama-management-interfaces/log-in-to-the-panorama-web-interface) on the active HA peer.
2. Select **Commit** and **Commit to Panorama** the SD-WAN configuration changes on the active HA peer.
  On the passive HA peer, select **Panorama** > **Managed Devices** > **Summary** and observe that the managed devices are now `out-of-sync`.
3. Log in to the primary HA peer [Panorama CLI](https://docs.paloaltonetworks.com/panorama/11-1/panorama-admin/set-up-panorama/access-and-navigate-panorama-management-interfaces/log-in-to-the-panorama-cli) and trigger a manual synchronization between the active and secondary HA peers.
  *request high-availability sync-to-remote running-config*
4. Log back in to the active HA peer Panorama web interface and select **Commit** > **Push to Devices** and **Push**.

## PAN-242910

On the Panorama management server, Panorama administrators (**Panorama** > **Administrators**) that are assigned a custom Panorama admin role (**Panorama** > **Admin Roles**) with **Push All Changes** enabled are unable to push configuration changes to managed firewalls when **Managed Devices** and **Push For Other Admins** are disabled.

## PAN-242837

Default login credentials and SSH fail after enabling FIPS-CC Mode on a firewall or Panorama after converting through the Maintenance Recovery Tool (MRT). The firewall or Panorama becomes stuck and requires a factory reset to recover.

## PAN-242561

GlobalProtect tunnel might disconnect shortly after being established when SSL is used as a transport protocol.

**Workaround**: Disable Internet Protocol version 6 (TCP/IPv6) on the PANGP Virtual Network Adapter.

## PAN-237106

```caveat
This issue is now resolved. See PAN-OS 11.1.8 Addressed Issues
```

LSVPN satellite certificates may be generated with serial numbers exceeding 40 hexadecimal characters. This causes certificate revocation and deletion operations to fail with the following error messages:

- `db-serialno can be at most 40 characters`
- `db-serialno is invalid`

**Workaround:**

To resolve this issue, use the following CLI commands with the LSVPN satellite serial number to manually delete or revoke the affected certificates:

**Delete certificate information**:`delete sslmgr-store certificate-info portal name <name> serialno <satellite_serial>`

**Revoke satellite certificates**:`delete sslmgr-store satellite-info-revoke-certificate portal <name> serialno <list_of_satellite_serials>`

## PAN-238769

FIPS-CC VM only. Upgrading to 10.1.10-h2 or 10.1.11 will change all locally created security Policy actions to Deny. Re-load the back-up config taken before upgrading or the last version to get the previous config back. Also, Unable to login to FIPSCC Mode devices with default credentials after converting the mode for 10.1.12 release , 10.2.7 release , 11.1.0 , 11.1.1, 11.0.3 versions.

## PAN-241041

```caveat
This issue is now resolved. See PAN-OS 11.1.3 Addressed Issues
```

On the Panorama management server exporting template or template stack variables (**Panorama** > **Templates**) in CSV format results in an empty CSV file.

## PAN-234015

The X-Forwarded-For (XFF) value is not displayed in traffic logs.

## PAN-225337

```caveat
This issue is now resolved. See PAN-OS 11.1.2 Addressed Issues
```

On the Panorama management server, the configuration push to a multi-vsys firewall fails if you:

1. Create a **Shared** and vsys-specific device group configuration object with an indentical name. For example, a **Shared** address object called `SharedAO1` and a vsys-specific address object also called `SharedAO1`.
2. Reference the **Shared** object in another **Shared** configuration. For example, reference the **Shared** address object (`SharedAO1`) in a **Shared** address group called `SharedAG1`.
3. Use the **Shared** configuration object with the reference in a vsys-specific configuration. For example, reference the **Shared** address group (`SharedAG1`) in a vsys-specific policy rule.

**Workaround:** Select **Panorama** > **Setup** > **Management** and edit the Panorama Settings to enable one of the following:

- **Shared Unused Address and Service Objects with Devices**—This options pushes all **Shared** objects, along with device group specific objects, to managed firewalls.
  This is a global setting and applies to all managed firewalls, and may result in pushing too many configuration objects to your managed firewalls.
- **Objects defined in ancestors will take higher precedence**—This option specifies that in the event of objects with the same name, ancestor object take precedence over descendent objects. In this case, the **Shared** objects take precedence over the vsys-specific object.
  This is a global setting and applies to all managed firewalls. In the example above, if the IP address for the **Shared** `SharedAO1` object was `10.1.1.1` and the device group specific `SharedAO1` was `10.2.2.2`, the `10.1.1.1` IP address takes precedence.

Alternatively, you can remove the duplicate address objects from the device group configuration to allow only the **Shared** objects in your configuration.

## PAN-224502

The autocommit time of the VM-Series firewall running PAN-OS 11.1.0 might take longer than expected.

## PAN-220180

Configured botnet reports (**Monitor** > **Botnet**) are not generated.

## PAN-217307

```caveat
This issue is now resolved. See PAN-OS 11.1.3 Addressed Issues.
```

The following Security policy rule (**Policies** > **Security**) filters return no results:

`log-start eq no`

`log-end eq no`

`log-end eq yes`

## PAN-207733

When a DHCPv6 client is configured on HA Active/Passive firewalls, if the DHCPv6 server goes down, after the lease time expires, the DHCPv6 client should enter SOLICIT state on both the Active and Passive firewalls. Instead, the client is stuck in BOUND state with an IPv6 address having lease time 0 on the Passive firewall.

## PAN-207611

When a DHCPv6 client is configured on HA Active/Passive firewalls, the Passive firewall sometimes crashes.

## PAN-207442

For M-700 appliances in an active/passive high availability (**Panorama** > **High Availability**) configuration, the `active-primary` HA peer configuration sync to the `secondary-passive` HA peer may fail. When the config sync fails, the job Results is `Successful` (**Tasks**), however the sync status on the **Dashboard** displays as `Out of Sync` for both HA peers.

**Workaround**: Perform a local commit on the `active-primary` HA peer and then synchronize the HA configuration.

1. [Log in to the Panorama web interface](https://docs.paloaltonetworks.com/panorama/11-0/panorama-admin/set-up-panorama/access-and-navigate-panorama-management-interfaces/log-in-to-the-panorama-web-interface) of the `active-primary` HA peer.
2. Select **Commit** and **Commit to Panorama**.
3. In the `active-primary` HA peer **Dashboard**, click **Sync to Peer** in the High Availability widget.

## PAN-207040

If you disable Advanced Routing, remove logical routers, and downgrade from PAN-OS 11.0.0 to a PAN-OS 10.2.x or 10.1.x release, subsequent commits fail and SD-WAN devices on Panorama have no Virtual Router name.

## PAN-206909

The Dedicated Log Collector is unable to reconnect to the Panorama management server if the `configd` process crashes. This results in the Dedicated Log Collector losing connectivity to Panorama despite the managed collector connection `Status` (**Panorama** > **Managed Collector**) displaying `connected` and the managed colletor `Health` status displaying as healthy.

This results in the local Panorama config and system logs not being forwarded to the Dedicated Log Collector. Firewall log forwarding to the disconnected Dedicated Log Collector is not impacted.

**Workaround:** Restart the `mgmtsrvr` process on the Dedicated Log Collector.

1. [Log in to the Dedicated Log Collector CLI](https://docs.paloaltonetworks.com/panorama/11-0/panorama-admin/set-up-panorama/access-and-navigate-panorama-management-interfaces/log-in-to-the-panorama-cli).
2. Confirm the Dedicated Log Collector is disconnected from Panorama.
  `admin>``show panorama-status`
  Verify the `Connected` status is `no`.
3. Restart the `mgmtsrvr` process.
  `admin>``debug software restart process management-server`

## PAN-197588

The PAN-OS ACC (Application Command Center) does not display a widget detailing statistics and data associated with vulnerability exploits that have been detected using inline cloud analysis.

## PAN-197419

```caveat
PA-1400 Series firewalls only
```

In **Network** > **Interface** > **Ethernet**, the power over Ethernet (PoE) ports do not display a **Tag** value.

## PAN-196758

On the Panorama management server, pushing a configuration change to firewalls leveraging SD-WAN erroneously show the auto-provisioned BGP configurations for SD-WAN as being edited or deleted despite no edits or deletions being made when you **Preview Changes** (**Commit** > **Push to Devices** > **Edit Selections** or **Commit** > **Commit and Push** > **Edit Selections**).

## PAN-195968

```caveat
PA-1400 Series firewalls only
```

When using the CLI to configure power over Ethernet (PoE) on a non-PoE port, the CLI prints an error depending on whether an interface type was selected on the non-PoE port or not. If an interface type, such as tap, Layer 2, or virtual wire, was selected before PoE was configured, the error message will not include the interface name (eg. ethernet1/4). If an interface type was not selected before PoE was configured, the error message will include the interface name.

## PAN-194978

```caveat
PA-1400 Series firewalls only
```

In **Network** > **Interface** > **Ethernet**, hovering the mouse over a power over Ethernet (PoE) **Link State** icon does not display link speed and link duplex details.

## PAN-187685

On the Panorama management server, the Template Status displays no synchronization status (**Panorama** > **Managed Devices** > **Summary**) after a bootstrapped firewall is successfully added to Panorama.

**Workaround:** After the bootstrapped firewall is successfully added to Panorama, [log in to the Panorama web interface](https://docs.paloaltonetworks.com/panorama/10-2/panorama-admin/set-up-panorama/access-and-navigate-panorama-management-interfaces/log-in-to-the-panorama-web-interface.html) and select **Commit** > **Push to Devices**.

## PAN-187407

The configured Advanced Threat Prevention inline cloud analysis action for a given model might not be honored under the following condition: If the firewall is set to **Hold client request for category lookup**and the action set to **Reset-Both** and the URL cache has been cleared, the first request for inline cloud analysis will be bypassed.

## PAN-186283

Templates appear out-of-sync on Panorama after successfully deploying the CFT stack using the Panorama plugin for AWS.

**Workaround**: Use **Commit** > **Push to Devices** to synchronize the templates.

## PAN-184708

```caveat
Panorama managed firewalls
```

Scheduled report emails (**Monitor** > **PDF Reports** > **Email Scheduler**) are not emailed if:

- A scheduled report email contains a Report Group (**Monitor** > **PDF Reports** > **Report Group**) which includes a SaaS Application Usage report.
- A scheduled report contains only a SaaS Application Usage Report.

**Workaround:** To receive a scheduled report email for all other PDF report types:

1. Select **Monitor** > **PDF Reports** > **Report Groups** and remove all SaaS Application Usage reports from all Report Groups.
2. Select **Monitor** > **PDF Reports** > **Email Scheduler** and edit the scheduled report email that contains only a SaaS Application Usage report. For the Recurrence, select **Disable** and click **OK**.
  Repeat this step for all scheduled report emails that contain only a SaaS Application Usage report.
3. **Commit**.
  () Select **Commit** > **Commit and Push**

## PAN-184406

Using the CLI to add a RAID disk pair to an M-700 appliance causes the dmdb process to crash.

**Workaround:** Contact customer support to stop the dmdb process before adding a RAID disk pair to a M-700 appliance.

## PAN-183404

Static IP addresses are not recognized when "and" operators are used with IP CIDR range.

## PAN-181933

If you use multiple log forwarding cards (LFCs) on the PA-7000 series, all of the cards may not receive all of the updates and the mappings for the clients may become out of sync, which causes the firewall to not correctly populate the Source User column in the session logs.

## PAN-164885

```caveat
This issue is now resolved. See PAN-OS 11.1.5 Addressed Issues
```

On the Panorama management server, pushes to managed firewalls (**Commit** > **Push to Devices** or **Commit and Push**) may fail when an EDL (**Objects** > **External Dynamic Lists**) is configured to **Check for updates** every 5 minutes due to the commit and EDL fetch processes overlapping. This is more likely to occur when multiple EDLs are configured to check for updates every 5 minutes.