--- type: Known product: PAN-OS version: 11.1.2 --- ## PAN-304756 After you disable the shared optimization feature in Panorama, ensure that you perform a full configuration push to all managed multi-vsys devices to re-establish a baseline. Failure to include every device group associated with the multi-vsys device during this push might result in incomplete or inconsistent configurations across virtual systems. ## PAN-298505 After upgrading multi-vsys firewalls, the sequence of the virtual system IDs (vsys ID) changes causing auto-commit failures with validation errors. This occurs when the multi-vsys firewall has virtual systems managed by Panorama, and the vsys ID sequence breaks when unused virtual systems are deleted and the changes are pushed to the firewall. ## PAN-291288 An active firewall might unexpectedly reboot due to a pan_task crash caused by a page allocation failure. This issue is observed after a period of runtime with traffic and telemetry collection. ## PAN-290088 When pushing configurations from Panorama to a firewall, a memory leak might occur in the firewall's configd process, particularly when the configurations contain shared policies. Each configuration push causes the configd process to consume additional memory that is not released after the commit completes. ## PAN-289383 ```caveat PA-800 series firewalls only ``` Upgrading firewalls to PAN-OS 11.0 or later causes SFP ports to go non-operational when the firewall uses forced port mode and the connected peer device operates without auto-negotiation. Workaround: Enable auto-negotiation on the connected peer firewall. ## PAN-288097 Routed process may stop responding after changing MTU or any link parameters when OSPF and PIM are enabled on the same interface. ## PAN-287871 When SSL Inbound Inspection is enabled and the firewall receives fragmented Client Hello packets that include the TCP timestamp option, the Client Hello message is forwarded to the destination server without the timestamp option. ## PAN-286231 When performing a partial Commit and Push on Panorama, there is a risk that unintended configuration changes might be pushed to a firewall. This issue is more likely to occur in the following scenarios:When you run Commit and Push operations as a single action.When you trigger multiple parallel commit-all jobs at the same time.Device groups and templates have different configuration synchronization versions. When you run Commit and Push operations as a single action. When you run Commit and Push operations as a single action. When you trigger multiple parallel commit-all jobs at the same time. When you trigger multiple parallel commit-all jobs at the same time. Device groups and templates have different configuration synchronization versions. Device groups and templates have different configuration synchronization versions. Workaround: Perform one of the following steps: Perform commit and push as two separate, sequential steps. Perform a full push instead of selective push. ## PAN-285894 If the Preserve Pre-NAT feature is enabled, dataplane crashes may occur, which could result in firewall reboots. Workaround: Disable the Preserve Pre-NAT feature using the set deviceconfig setting preserve-prenat-feature no CLI command. ## PAN-283429 When you use custom certificates for the connection between Panorama and a log collector, the automated renewal for the predefined ElasticSearch certificates gets disrupted. Workaround: Remove the custom certificates before the ElasticSearch certificates expire. This allows the system to correctly identify and renew the predefined ElasticSearch certificates. After the renewal is complete, re-install the custom certificates. ## PAN-281885 When exporting and importing the CSV file, the hash values of pre-shared key (PSK) variables set at template and template stack levels inconsistently change, resulting in both variables displaying the same hash value. ## PAN-280532 When you use a single syslog server over TCP for log forwarding, and the connectivity to the syslog server breaks, syslog forwarding does not resume even after the connectivity to the server restores. Workaround: Performing one of the following tasks: Reboot the firewall. Temporarily, configure syslog to use UDP, commit the configuration, revert to TCP, and then commit. ## PAN-280471 When applying filters or searching for logs in the PanoramaMonitorLogssection, you might experience slow performance. ## PAN-279415 Service routes configured for a data plane interface might incorrectly route traffic through the management plane interface instead. This issue impacts Syslog and CRL status traffic when the service route lacks a specific destination custom service route. ## PAN-278296 The system MAC address of the aggregate interface is the same on both the active and the passive devices, causing some packets to be sent incorrectly to the passive device. This is causing the AE interface on the active firewall to not come up. ## PAN-277417 Memory leak issues can occur during the parsing of server certificates used for SSL Inbound Inspection, preventing the firewall from completing inspection. ## PAN-277034 WildFire reports might not fully display or be downloadable because some static resources fail to load. ## PAN-275601 When Panorama is not internet-connected and you try to upload images to the managed firewalls by using the Validate option, the upload fails with the following error: Failed to create multi-upload job. No valid software deploy targets found. ## PAN-273300 When upgrading Panorama from PAN-OS 10.2 or PAN-OS 11.0 to PAN-OS 11.1 or a later release, Panorama fails to upgrade if it is operating within a Collector Group. The following error appears:Error: Traceback (most recent call last):File "/opt/panrepo/releases//validate"... (min ([dts['min'] for dts in 10g_type_intv_dir.values() if dts|'min']])-strftime ('%Y-%m-%d'), ## PAN-263987 When a NAT traversal (NAT-T or UDP encapsulation) IPSec tunnel is terminated on a Palo Alto Networks firewall and the NAT rule applied to the NAT-T IPSec tunnel is also on the same firewall, then the data traffic flowing through the NAT-T IPSec tunnel can't be NATed correctly. ## PAN-263208 ```caveat PA-5440 and PA-5445 firewalls only ``` High system load can cause the firewall to generate interrupts and trigger dataplane crashes. ## PAN-262556 The ElasticSearch cluster health status might continue to remain yellow for an extended period after upgrading to PAN-OS 11.1.2. ## PAN-262287 Dereferencing a NULL pointer that occurs might cause pan_task processes to crash. ## PAN-260851 From the NGFW or Panorama CLI, you can override the existing application tag even if Disable Override is enabled for the application (ObjectsApplications) tag. ## PAN-259769 GlobalProtect portal is not accessible via a web browser and the app displays the error ERR_EMPTY_RESPONSE. ## PAN-257615 The Panorama web interface intermittently displays logs or fails to display logs completely. ## PAN-255538 On the PA-455 firewall, the LEDs indicating the link status of Ports 3 and 4 are swapped. ## PAN-252085 The PA-450R, PA-450R-5G, and PA-455 firewalls can experience an interruption of traffic when switching the combo port connection from fiber to copper. Workaround: With the copper port connected, initiate a soft reboot of the firewall using the CLI command request restart system. After the reboot, the copper port will be able to process traffic. ## PAN-250062 Device telemetry might fail at configured intervals due to bundle generation issues. ## PAN-243951 On the Panorama management sever in an active/passive High Availability (HA) configuration, managed devices (PanoramaManaged DevicesSummary) display as out-of-sync on the passive HA peer when configuration changes are made to the SD-WAN (PanoramaSD-WAN) configuration on the active HA peer. Workaround: Manually synchronize the Panorama HA peers. Log in to the Panorama web interface on the active HA peer. Log in to the Panorama web interface on the active HA peer. Select Commit and Commit to Panorama the SD-WAN configuration changes on the active HA peer. On the passive HA peer, select PanoramaManaged DevicesSummary and observe that the managed devices are now out-of-sync. Select Commit and Commit to Panorama the SD-WAN configuration changes on the active HA peer. On the passive HA peer, select PanoramaManaged DevicesSummary and observe that the managed devices are now out-of-sync. Log in to the primary HA peer Panorama CLI and trigger a manual synchronization between the active and secondary HA peers.request high-availability sync-to-remote running-config Log in to the primary HA peer Panorama CLI and trigger a manual synchronization between the active and secondary HA peers. request high-availability sync-to-remote running-config Log back in to the active HA peer Panorama web interface and select CommitPush to Devices and Push. Log back in to the active HA peer Panorama web interface and select CommitPush to Devices and Push. ## PAN-241041 On the Panorama management server exporting template or template stack variables (PanoramaTemplates) in CSV format results in an empty CSV file. ## PAN-237106 LSVPN satellite certificates may be generated with serial numbers exceeding 40 hexadecimal characters. This causes certificate revocation and deletion operations to fail with the following error messages: db-serialno can be at most 40 characters db-serialno is invalid To resolve this issue, use the following CLI commands with the LSVPN satellite serial number to manually delete or revoke the affected certificates: Delete certificate information:delete sslmgr-store certificate-info portal name serialno Revoke satellite certificates:delete sslmgr-store satellite-info-revoke-certificate portal serialno ## PAN-234015 The X-Forwarded-For (XFF) value is not displayed in traffic logs. ## PAN-224502 The autocommit time of the VM-Series firewall running PAN-OS 11.1.0 might take longer than expected. ## PAN-220180 Configured botnet reports (MonitorBotnet) are not generated. ## PAN-217307 The following Security policy rule (PoliciesSecurity) filters return no results: log-start eq no log-end eq no log-end eq yes ## PAN-207733 When a DHCPv6 client is configured on HA Active/Passive firewalls, if the DHCPv6 server goes down, after the lease time expires, the DHCPv6 client should enter SOLICIT state on both the Active and Passive firewalls. Instead, the client is stuck in BOUND state with an IPv6 address having lease time 0 on the Passive firewall. ## PAN-207611 When a DHCPv6 client is configured on HA Active/Passive firewalls, the Passive firewall sometimes crashes. ## PAN-207442 For M-700 appliances in an active/passive high availability (PanoramaHigh Availability) configuration, the active-primary HA peer configuration sync to the secondary-passive HA peer may fail. When the config sync fails, the job Results is Successful (Tasks), however the sync status on the Dashboard displays as Out of Sync for both HA peers. Workaround: Perform a local commit on the active-primary HA peer and then synchronize the HA configuration. Log in to the Panorama web interface of the active-primary HA peer. Log in to the Panorama web interface of the active-primary HA peer. Select Commit and Commit to Panorama. Select Commit and Commit to Panorama. In the active-primary HA peer Dashboard, click Sync to Peer in the High Availability widget. In the active-primary HA peer Dashboard, click Sync to Peer in the High Availability widget. ## PAN-207040 If you disable Advanced Routing, remove logical routers, and downgrade from PAN-OS 11.0.0 to a PAN-OS 10.2.x or 10.1.x release, subsequent commits fail and SD-WAN devices on Panorama have no Virtual Router name. ## PAN-206909 The Dedicated Log Collector is unable to reconnect to the Panorama management server if the configd process crashes. This results in the Dedicated Log Collector losing connectivity to Panorama despite the managed collector connection Status (PanoramaManaged Collector) displaying connected and the managed colletor Health status displaying as healthy. This results in the local Panorama config and system logs not being forwarded to the Dedicated Log Collector. Firewall log forwarding to the disconnected Dedicated Log Collector is not impacted. Workaround: Restart the mgmtsrvr process on the Dedicated Log Collector. Log in to the Dedicated Log Collector CLI. Log in to the Dedicated Log Collector CLI. Confirm the Dedicated Log Collector is disconnected from Panorama.admin> show panorama-status Verify the Connected status is no. Confirm the Dedicated Log Collector is disconnected from Panorama. admin> show panorama-status Verify the Connected status is no. admin> show panorama-status admin> show panorama-status Verify the Connected status is no. Restart the mgmtsrvr process.admin> debug software restart process management-server Restart the mgmtsrvr process. admin> debug software restart process management-server admin> debug software restart process management-server admin> debug software restart process management-server ## PAN-197588 The PAN-OS ACC (Application Command Center) does not display a widget detailing statistics and data associated with vulnerability exploits that have been detected using inline cloud analysis. ## PAN-197419 ```caveat PA-1400 Series firewalls only ``` In NetworkInterfaceEthernet, the power over Ethernet (PoE) ports do not display a Tag value. ## PAN-196758 On the Panorama management server, pushing a configuration change to firewalls leveraging SD-WAN erroneously show the auto-provisioned BGP configurations for SD-WAN as being edited or deleted despite no edits or deletions being made when you Preview Changes (CommitPush to DevicesEdit Selections or CommitCommit and PushEdit Selections). ## PAN-195968 ```caveat PA-1400 Series firewalls only ``` When using the CLI to configure power over Ethernet (PoE) on a non-PoE port, the CLI prints an error depending on whether an interface type was selected on the non-PoE port or not. If an interface type, such as tap, Layer 2, or virtual wire, was selected before PoE was configured, the error message will not include the interface name (eg. ethernet1/4). If an interface type was not selected before PoE was configured, the error message will include the interface name. ## PAN-194978 ```caveat PA-1400 Series firewalls only ``` In NetworkInterfaceEthernet, hovering the mouse over a power over Ethernet (PoE) Link State icon does not display link speed and link duplex details. ## PAN-187685 On the Panorama management server, the Template Status displays no synchronization status (PanoramaManaged DevicesSummary) after a bootstrapped firewall is successfully added to Panorama. Workaround: After the bootstrapped firewall is successfully added to Panorama, log in to the Panorama web interface and select CommitPush to Devices. ## PAN-187407 The configured Advanced Threat Prevention inline cloud analysis action for a given model might not be honored under the following condition: If the firewall is set to Hold client request for category lookup and the action set to Reset-Both and the URL cache has been cleared, the first request for inline cloud analysis will be bypassed. ## PAN-186283 Templates appear out-of-sync on Panorama after successfully deploying the CFT stack using the Panorama plugin for AWS. Workaround: Use CommitPush to Devices to synchronize the templates. ## PAN-184708 ```caveat Panorama managed firewalls ``` Scheduled report emails (MonitorPDF ReportsEmail Scheduler) are not emailed if: A scheduled report email contains a Report Group (MonitorPDF ReportsReport Group) which includes a SaaS Application Usage report. A scheduled report contains only a SaaS Application Usage Report. Workaround: To receive a scheduled report email for all other PDF report types: Select MonitorPDF ReportsReport Groups and remove all SaaS Application Usage reports from all Report Groups. Select MonitorPDF ReportsEmail Scheduler and edit the scheduled report email that contains only a SaaS Application Usage report. For the Recurrence, select Disable and click OK.Repeat this step for all scheduled report emails that contain only a SaaS Application Usage report. Repeat this step for all scheduled report emails that contain only a SaaS Application Usage report. Commit.() Select CommitCommit and Push () Select CommitCommit and Push ## PAN-184406 Using the CLI to add a RAID disk pair to an M-700 appliance causes the dmdb process to crash. Workaround: Contact customer support to stop the dmdb process before adding a RAID disk pair to a M-700 appliance. ## PAN-183404 Static IP addresses are not recognized when "and" operators are used with IP CIDR range. ## PAN-181933 If you use multiple log forwarding cards (LFCs) on the PA-7000 series, all of the cards may not receive all of the updates and the mappings for the clients may become out of sync, which causes the firewall to not correctly populate the Source User column in the session logs. ## PAN-164885 On the Panorama management server, pushes to managed firewalls (CommitPush to Devices or Commit and Push) may fail when an EDL (ObjectsExternal Dynamic Lists) is configured to Check for updates every 5 minutes due to the commit and EDL fetch processes overlapping. This is more likely to occur when multiple EDLs are configured to check for updates every 5 minutes.