firewallissues/web/data/issues/PAN-OS/known/10.0.9_2026-03-16.md

type, product, version, source, crawl

type	product	version	source	crawl
Known	PAN-OS	10.0.9	common-crawl	CC-MAIN-2026-12

APL-8269

For data retrieved from Cortex Data Lake, the Threat Name column in Panorama > ACC > threat-activity appears blank.

PLUG-380

When you rename a device group, template, or template stack in Panorama that is part of a VMware NSX service definition, the new name is not reflected in NSX Manager. Therefore, any ESXi hosts that you add to a vSphere cluster are not added to the correct device group, template, or template stack and your Security policy is not pushed to VM-Series firewalls that you deploy after you rename those objects. There is no impact to existing VM-Series firewalls.

WF500-5471

After using the firewall CLI to add a WildFire appliance with an IPv6 address, the initial connection may fail.

Workaround: Retry connecting after you restart the web server with the following command: debug software restart process web-server.

PAN-178194

A UI issue in PAN-OS renders the contents of the Inline ML tab in the URL Filtering Profile inaccessible on firewalls licensed for Advanced URL Filtering. Additionally, a message indicating that a License required for URL filtering to function is unavailable displays at the bottom of the UI. These errors do not affect the operation of Advanced URL Filtering or URL Filtering Inline ML.

Workaround: Configuration settings for URL Filtering Inline ML must be applied through the CLI. The following configuration commands are available:

• Define URL exceptions for specific web sites— admin#``set profiles url-filtering <url_filtering_profile_name> mlav-category-exception

• Configuration settings for each inline ML model— admin#``set profiles url-filtering <url_filtering_profile_name> mlav-engine-urlbased-enabled

PAN-157444

As a result of a telemetry handling update, the Source Zone field in the DNS analytics logs (viewable in the DNS Analytics tab within AutoFocus) might not display correct results.

PAN-157327

On downgrade to PAN-OS 9.1, Enterprise Data Loss Prevention (DLP) filtering settings (Device > Setup > DLP) are not removed and cause commit errors for the downgraded firewall if you do not uninstall the Enterprise DLP plugin before downgrade.

Workaround: After you successfully downgrade a managed firewall to PAN-OS 9.1, commit and push from Panorama to remove the Enterprise DLP filtering settings and complete the downgrade.

1. Downgrade your managed firewall to PAN-OS 9.1
2. Log in to the firewall web interface and view the Tasks to verify all auto commits related to the downgrade have completed successfully.
3. Log in to the Panorama web interface and Commit > Commit and Push to your managed firewall downgraded to PAN-OS 9.1.

PAN-157103

Multi-channel functionality may not be properly utilized on an VM-Series firewall deployed in VMware NSX-V after the service is first deployed.

Workaround: Execute the command debug dataplane pow status to view the number of channels being utilized by the dataplane.

Per pan-task Netx statisticsCounter Name 1 2 3 4 5 6 Total---------------------------------------------ready_dvf 2 0 0 0 0 0 2

If multi-channel functionality is not working, disable your NSX-V security policy and reapply it. Then reboot the VM-Series firewall. When the firewall is back up, verify that multi-channel functionality is working by executing the command debug dataplane pow status. It should now show multiple channels being utilized.

Per pan-task Netx statisticsCounter Name 1 2 3 4 5 6 Total---------------------------------------------ready_dvf 1 1 0 0 0 0 2

PAN-156645

If the SD-WAN interface was Down and it comes Up during a commit (for example, if you configure it from Down to Auto), SD-WAN ignores the change and keeps the link Down in the SD-WAN connection. In this case, SD-WAN won't choose to send traffic to this link. If this is the only link to the internet, this behavior may cause an outage, including failure of the IKE negotiation between the Branch and Hub, and such Tunnel will be down.

Workaround: Commit again or toggle the interface link Down and Up; the SD-WAN statistics will be correct and the problem will resolve.

PAN-156598

Panorama only

If you configure a standard custom vulnerability signature in a custom Vulnerability Protection profile in a shared device group, the shared profile custom signatures do not populate in the other device groups when you configure a combination custom vulnerability signature.

Workaround: Use the CLI to update the combination signature.

PAN-154292

On the Panorama management server, downgrading from a PAN-OS 10.0 release to a PAN-OS 9.1 release causes Panorama commit (Commit > Commit to Panorama) failures if a custom report (Monitor > Manage Custom Reports) is configured to Group By Session ID.

Workaround: After successful downgrade, reconfigure the Group By setting in the custom report.

PAN-154266

When an application matches an SD-WAN policy and some sessions for the same application do not match an SD-WAN policy, the SD-WAN Monitoring—Traffic Characteristics screen displays the Links Used information with an SD-WAN policy and a null policy. Sessions that do not have an SD-WAN policy ID are filtered from Links Used.

Workaround: If you want to see session logs that include a default selection, create a catch-all SD-WAN policy rule and place it last in the list of SD-WAN policies.

PAN-154034

On the Panorama management server, the Type column in the System logs (Monitor > Logs > System) for managed firewalls running a PAN-OS 9.1 release erroneously display iot as the type.

PAN-154032

On the Panorama management server, downgrading to PAN-OS 9.1 with the Panorama plugin for Cisco TrustSec version 1.0.2 installed does not automatically transform the plugin to be compatible with PAN-OS 9.1

Workaround: After successful downgrade to PAN-OS 9.1, Remove Config (Panorama > Plugins) of the Panorama plugin for Cisco TrustSec and then reconfigure the plugin.

PAN-153803

On the Panorama management server, scheduled email PDF reports (Monitor > PDF Reports) fail if a GIF image is used in the header or footer.

PAN-153557

On the Panorama management server CLI, the overall report status for a report query is marked as Done despite reports generated from logs in the Cortex Data Lake (CDL) from the PODamericas Collector Group jobs are still in a Running state.

PAN-153068

The Bonjour Reflector option is supported on up to 16 interfaces. If you enable it on more than 16 interfaces, the commit succeeds and the Bonjour Reflector option is enabled only for the first 16 interfaces and ignored for any additional interfaces.

PAN-152825

On the Panorama management server, you cannot view the SD-WAN license installed on an SD-WAN firewall (Panorama > Device Deployment > Licenses).

Workaround: Log in to the Panorama CLI and enter the following command to view the SDWAN license information for your managed firewalls.

admin>``request batch license info

PAN-152433

When you have an active/passive HA pair of PA-3200 Series firewalls running PAN-OS 10.0.0 with NAT configured, if you upgrade one firewall to PAN-OS 10.0.1, the firewall goes to non-functional state due to a NAT oversubscription mismatch between the HA peers. The same non-functional state results if both HA peers are running PAN-OS 10.0.1 and you downgrade one to PAN-OS 10.00. The upgraded or downgraded firewall goes to non-functional state because PAN-OS 10.0.0 and 10.0.1 have different default NAT oversubscription rates.

Workaround: After an upgrade or downgrade, modify the NAT oversubscription rate on one firewall so that the rates on the HA pair match.

PAN-151238

There is a known issue where M-100 appliances are able to download and install a PAN-OS 10.0 release image even though the M-100 appliance is no longer supported after PAN-OS 9.1. (Refer to the hardware end-of-life dates.)

PAN-151198

On the Panorama management server, read-only Panorama administrators (Panorama > Administrators) can load managed firewall configuration Backups (Panorama > Managed Devices > Summary).

PAN-151115

If a Security rule uses a IP Address External Dynamic List (EDL) for IPv6 traffic, the information for the EDL does not display in the Source EDL or Destination EDL columns in the logs.

PAN-151085

On a PA-7000 Series firewall chassis having multiple slots, when HA clustering is enabled on an active/active HA pair, the session table count for one of the peers can show a higher count than the actual number of active sessions on that peer. This behavior can be seen when the session is being set up on a non-cache slot (for example, when a session distribution policy is set to round-robin or session-load); it is caused by the additional cache lookup that happens when HA cluster participation is enabled.

PAN-150801

Automatic quarantine of a device based on forwarding profile or log setting does not work on the PA-7000 Series firewalls.

PAN-150515

After you install the device certificate on a new Panorama management server, Panorama is not able to connect to the IoT Security edge service.

Workaround: Restart Panorama to connect to the IoT Security edge service.

PAN-150345

During updates to the Device Dictionary, the IoT Security service does not push new Device-ID attributes (such as new device profiles) to the firewall until a manual commit occurs.

Workaround: Perform a force commit to push the attributes in the content update to the firewall.

PAN-150361

In an Active-Passive high availability (HA) configuration, an error displays if you create a device object on the passive device.

Workaround: Load the running configuration and perform a force commit to sync the devices.

PAN-148971

If you enter a search term for Events that are related to IoT in the System logs and apply the filter, the page displays an Invalid term error.

Workaround: Specify iot as the Type Attribute to filter the logs and use the search term as the Description Attribute. For example: ( subtype eq iot ) and ( description contains 'gRPC connection' ).

PAN-148924

In an active-passive HA configuration, tags for dynamic user groups are not persistent after rebooting the firewall because the active firewall does not sync the tags to the passive firewall during failover.

PAN-146995

After downgrading a Panorama management server from PAN-OS 10.0 to PAN-OS 9.1, the VLD and logd processes may crash when Panorama reboots.

Workaround: Panorama automatically restarts the VLD and logd processes.

PAN-146807

Changing the device group configured in a monitoring definition from a child DG to a parent DG, or vice versa, might cause firewalls configured in the child DG to lose IP tag mapping information received from the monitoring definition. Only firewalls assigned to the parent DG receive IP tag mapping updates.

Workaround: Perform a manual config sync on the device group that lost the IP tag mapping information.

PAN-146573

PA-7000 Series firewalls configured with a large number of interfaces experience impacted performance and possible timeouts when performing SNMP queries.

PAN-146485

On the Panorama management server, adding, deleting, or modifying the upstream NAT configuration (Panorama > SD-WAN > Devices) does not display the branch template stack as out of sync.

Additionally, adding, deleting, or modifying the BGP configuration (Panorama > SD-WAN > Devices) does not display the hub and branch template stacks as out of sync. For example, modifying the BGP configuration on the branch firewall does not cause the hub template stack to display as out of sync, nor does modifying the BGP configuration on the hub firewall cause the branch template stack as out of sync.

Workaround: After performing a configuration change, Commit and Push the configuration changes to all hub and branch firewalls in the VPN cluster containing the firewall with the modified configuration.

PAN-145460

CN-MGMT pods fail to connect to the Panorama management server when using the Kubernetes plugin.

Workaround: Commit the Panorama configuration after the CN-MGMT pod successfully registers with Panorama.

PAN-144889

On the Panorama management server, adding, deleting, or modifying the original subnet IP, or adding a new subnet after you successfully configure a tunnel IP subnet, for the SD-WAN 1.0.2 plugin does not display the managed firewall templates (Panorama > Managed Devices > Summary) as Out of Sync.

Workaround: When modifying the original subnet IP, or adding a new subnet, push the template configuration changes to your managed firewalls and Force Template Values (Commit > Push to Devices > Edit Selections).

PAN-143132

Fetching the device certificate from the Palo Alto Networks Customer Support Portal (CSP) may fail and displays the following error in the CLI:

ERROR Failed to process S1C msg: Error

Workaround: Retrying fetching the device certificate from the Palo Alto Networks CSP.

PAN-141630

Current performance limitation: single data plane use only. The PA-5200 Series and PA-7000 Series firewalls that support 5G network slice security, 5G equipment ID security, and 5G subscriber ID security use a single data plane only, which currently limits the firewall performance.

PAN-140959

The Panorama management server allows you to downgrade Zero Touch Provisioning (ZTP) firewalls to PAN-OS 9.1.2 and earlier releases where ZTP functionality is not supported.

PAN-140008

ElasticSearch is forced to restart when the masterd process misses too many heartbeat messages on the Panorama management server resulting in a delay in a log query and ingestion.

PAN-136763

On the Panorama management server, managed firewalls display as disconnected when installing a PAN-OS software update (Panorama > Device Deployment > Software) but display as connected when you view your managed firewalls Summary (Panorama > Managed Devices > Summary) and from the CLI.

Workaround: Log out and log back in to the Panorama web interface.

PAN-136701

PA-7000b Series firewalls only

Packets for new sessions drop when handling predict sessions.

Workaround: Use the following CLi commands to bypass this issue:

• set session hwpredict disable yes
• show session hwpredict status

PAN-135742

There is an issue in HTTP2 session decryption where the App-ID in the decryption log is the App-ID of the parent session (which is web-browsing).

PAN-134053

ACC does not filter WildFire logs from Dynamic User Groups.

PAN-132598

The Panorama management server does not check for duplicate addresses in address groups (Objects > Address Groups) and duplicate services in service groups (Objects > Service Groups) when created from the CLI.

PAN-130550

PA-3200 Series, PA-5220, PA-5250, PA-5260, and PA-7000 Series firewalls

For traffic between virtual systems (inter-vsys traffic), the firewall cannot perform source NAT using dynamic IP (DIP) address translation.

Workaround: Use source NAT with Dynamic IP and Port (DIPP) translation on inter-vsys traffic.

PAN-127813

In the current release, SD-WAN auto-provisioning configures hubs and branches in a hub and spoke model, where branches don’t communicate with each other. Expected branch routes are for generic prefixes, which can be configured in the hub and advertised to all branches. Branches with unique prefixes are not published up to the hub.

Workaround: Add any specific prefixes for branches to the hub advertise-list configuration.

PAN-127206

If you use the CLI to enable the cleartext option for the Include Username in HTTP Header Insertion Entries feature, the authentication request to the firewall may become unresponsive or time out.

PAN-123277

Dynamic tags from other sources are accessible using the CLI but do not display on the Panorama web interface.

PAN-123040

When you try to view network QoS statistics on an SD-WAN branch or hub, the QoS statistics and the hit count for the QoS rules don’t display. A workaround exists for this issue. Please contact Support for information about the workaround.

PAN-121678

PA-7000b Series only

The following error during secure boot has no impact and can be ignored:

[ 0.672461] Device 'efifb.0' does not have a release() function, it is broken and must be fixed.[ 2.026107] EFI: Problem loading in-kernel X.509 certificate (-65)Maintenance Mode filesystem size: 2.0G

PAN-120440

There is an issue on M-500 Panorama management servers where any ethernet interface with an IPv6 address having Private PAN-DB-URL connectivity only supports the following format: 2001:DB9:85A3:0:0:8A2E:370:2.

PAN-120423

PAN-OS 10.0.0 does not support the XML API for GlobalProtect logs.

PAN-120303

There is an issue where the firewall remains connected to the PAN-DB-URL server through the old management IP address on the M-500 Panorama management server, even when you configured the Eth1/1 interface.

Workaround: Update the PAN-DB-URL IP address on the firewall using one of the methods below.

• Modify the PAN-DB Server IP address on the managed firewall.
  1. On the web interface, delete the PAN-DB Server IP address (Device > Setup > Content ID > URL Filtering settings).
  2. Commit your changes.
  3. Add the new M-500 Eth1/1 IP PAN-DB IP address.
  4. Commit your changes.
• Restart the firewall (devsrvr) process.
  1. Log in to the firewall CLI.
  2. Restart the devsrvr process: debug software restart process device-server

PAN-116017

Google Cloud Platform (GCP) only

The firewall does not accept the DNS value from the initial configuration (init-cfg) file when you bootstrap the firewall.

Workaround: Add DNS value as part of the bootstrap.xml in the bootstrap folder and complete the bootstrap process.

PAN-115816

Microsoft Azure only

There is an intermittent issue where an Ethernet (eth1) interface does not come up when you first boot up the firewall.

Workaround: Reboot the firewall.

PAN-114495

Alibaba Cloud runs on a KVM hypervisor and supports two Virtio modes: DPDK (default) and MMAP. If you deploy a VM-Series firewall running PAN-OS 9.0 in DPDK packet mode and you then switch to MMAP packet mode, the VM-Series firewall duplicates packets that originate from or terminate on the firewall. As an example, if a load balancer or a server behind the firewall pings the VM-Series firewall after you switch from DPDK packet mode to MMAP packet mode, the firewall duplicates the ping packets.

Throughput traffic is not duplicated if you deploy the VM-Series firewall using MMAP packet mode.

PAN-112694

Firewalls with multiple virtual systems only

If you configure dynamic DNS (DDNS) on a new interface (associated with vsys1 or another virtual system) and you then create a New Certificate Profile from the drop-down, you must set the location for the Certificate Profile to Shared. If you configure DDNS on an existing interface and then create a new Certificate Profile, we also recommend that you choose the Shared location instead of a specific virtual system. Alternatively, you can select a preexisting certificate profile instead of creating a new one.

PAN-112456

You can temporarily submit a change request for a URL Category with three suggested categories; however, only two categories are supported. Do not add more than two suggested categories to a change request until we address this issue. If you submit more than two suggested categories, only the first two categories in the change request are evaluated.

PAN-112135

You cannot unregister tags for a subnet or range in a dynamic address group from the web interface.

Workaround: Use an XML API request to unregister the tags for the subnet or range.

PAN-111928

Invalid configuration errors are not displayed as expected when you revert a Panorama management server configuration.

Workaround: After you revert the Panorama configuration, Commit (Commit > Commit to Panorama) the reverted configuration to display the invalid configuration errors.

PAN-111866

The push scope selection on the Panorama web interface displays incorrectly even though the commit scope displays as expected. This issue occurs when one administrator makes configuration changes to separate device groups or templates that affect multiple firewalls and a different administrator attempts to push those changes.

Workaround: Perform one of the following tasks.

• Initiate a Commit to Panorama operation followed by a Push to Devices operation for the modified device group and template configurations.
• Manually select the devices that belong to the modified device group and template configurations.

PAN-111729

If you disable DPDK mode and enable it again, you must immediately reboot the firewall.

PAN-111670

Tagged VLAN traffic fails when sent through an SR-IOV adapter.

PAN-110794

DGA-based threats shown in the firewall threat log display the same name for all such instances.

PAN-109759

The firewall does not generate a notification for the GlobalProtect client when the firewall denies an unencrypted TLS session due to an authentication policy match.

PAN-109526

The system log does not correctly display the URL for CRL files; instead, the URLs are displayed with encoded characters.

PAN-106675

After upgrading the Panorama management server to PAN-OS 8.1 or a later release, predefined reports do not display a list of top attackers.

Workaround: Create new threat summary reports (Monitor > PDF Reports > Manage PDF Summary) containing the top attackers to mimic the predefined reports.

PAN-104780

If you configure a HIP object to match only when a connecting endpoint is managed (Objects > GlobalProtect > HIP Objects > > General > Managed), iOS and Android endpoints that are managed by AirWatch are unable to successfully match the HIP object and the HIP report incorrectly indicates that these endpoints are not managed. This issue occurs because GlobalProtect gateways cannot correctly identify the managed status of these endpoints.

Additionally, iOS endpoints that are managed by AirWatch are unable to match HIP objects based on the endpoint serial number because GlobalProtect gateways cannot identify the serial numbers of these endpoints; these serial numbers do not appear in the HIP report.

PAN-103276

Adding a disk to a virtual appliance running Panorama 8.1 or a later release on VMware ESXi 6.5 update1 causes the Panorama virtual appliance and host web client to become unresponsive.

Workaround: Upgrade the ESXi host to ESXi 6.5 update2 and add the disk again.

PAN-101688

Panorama plugins

The IP address-to-tag mapping information registered on a firewall or virtual system is not deleted when you remove the firewall or virtual system from a Device Group.

Workaround: Log in to the CLI on the firewall and enter the following command to unregister the IP address-to-tag mappings: debug object registered-ip clear all.

PAN-101537

After you configure and push address and address group objects in Shared and vsys-specific device groups from the Panorama management server to managed firewalls, executing the show log <log-type> direction equal <direction> <dst> | <src> in <object-name> command on a managed firewall only returns address and address group objects pushed form the Shared device group.

Workaround: Specify the vsys in the query string:

admin> set system target-vsys <vsys-name>

admin> show log <log-type> direction equal <direction> query equal ‘vsys eq <vsys-name>’ <dst> | <src> in <object-name>

PAN-98520

When booting or rebooting a PA-7000 Series Firewall with the SMC-B installed, the BIOS console output displays attempts to connect to the card's controller in the System Memory Speed section. The messages can be ignored.

PAN-97757

GlobalProtect authentication fails with an Invalid username/password error (because the user is not found in Allow List) after you enable GlobalProtect authentication cookies and add a RADIUS group to the Allow List of the authentication profile used to authenticate to GlobalProtect.

Workaround: Disable GlobalProtect authentication cookies. Alternatively, disable (clear) Retrieve user group from RADIUS in the authentication profile and configure group mapping from Active Directory (AD) through LDAP.

PAN-97524

Panorama management server only

The Security Zone and Virtual System columns (Network tab) display None after a Device Group and Template administrator with read-only privileges performs a context switch.

PAN-96446

A firewall that is not included in a Collector Group fails to generate a system log if logs are dropped when forwarded to a Panorama management server that is running in Management Only mode.

PAN-95773

On VM-Series firewalls that have Data Plane Development Kit (DPDK) enabled and that use the i40e network interface card (NIC), the show session info CLI command displays an inaccurate throughput and packet rate.

Workaround: Disable DPDK by running the set system setting dpdk-pkt-io off CLI command.

PAN-95511

The name for an address object, address group, or an external dynamic list must be unique. Duplicate names for these objects can result in unexpected behavior when you reference the object in a policy rule.

PAN-95028

For administrator accounts that you created in PAN-OS 8.0.8 and earlier releases, the firewall does not apply password profile settings (Device > Password Profiles) until after you upgrade to PAN-OS 8.0.9 or a later release and then only after you modify the account passwords. (Administrator accounts that you create in PAN-OS 8.0.9 or a later release do not require you to change the passwords to apply password profile settings.)

PAN-94846

When DPDK is enabled on the VM-Series firewall with i40e virtual function (VF) driver, the VF does not detect the link status of the physical link. The VF link status remains up, regardless of changes to the physical link state.

PAN-94093

HTTP Header Insertion does not work when jumbo frames are received out of order.

PAN-93968

The firewall and Panorama web interfaces display vulnerability threat IDs that are not available in PAN-OS 9.0 releases (Objects > Security Profiles > Vulnerability Protection > > Exceptions). To confirm whether a particular threat ID is available in your release, monitor the release notes for each new Applications and Threats content update or check the Palo Alto Networks Threat Vault to see the minimum PAN-OS release version for a threat signature.

PAN-93607

When you configure a VM-500 firewall with an SCTP Protection profile (Objects > Security Profiles > SCTP Protection) and you try to add the profile to an existing Security Profile Group (Objects > Security Profile Groups), the Security Profile Group doesn’t list the SCTP Protection profile in its drop-down list of available profiles.

Workaround: Create a new Security Profile Group and select the SCTP Protection profile from there.

PAN-93532

When you configure a firewall running PAN-OS 9.0 as an nCipher HSM client, the web interface on the firewall displays the nCipher server status as Not Authenticated, even though the HSM state is up (Device > Setup > HSM).

PAN-93193

The memory-optimized VM-50 Lite intermittently performs slowly and stops processing traffic when memory utilization is critically high. To prevent this issue, make sure that you do not:

• Switch to the firewall Context on the Panorama management server.
• Commit changes when a dynamic update is being installed.
• Generate a custom report when a dynamic update is being installed.
• Generate custom reports during a commit.

Workaround: When the firewall performs slowly, or you see a critical System log for memory utilization, wait for 5 minutes and then manually reboot the firewall.

Use the Task Manager to verify that you are not performing memory intensive tasks such as installing dynamic updates, committing changes or generating reports, at the same time, on the firewall.

PAN-91802

On a VM-Series firewall, the clear session all CLI command does not clear GTP sessions.

PAN-83610

In rare cases, a PA-5200 Series firewall (with an FE100 network processor) that has session offload enabled (default) incorrectly resets the UDP checksum of outgoing UDP packets.

Workaround: In PAN-OS 8.0.6 and later releases, you can persistently disable session offload for only UDP traffic using the set session udp-off load no CLI command.

PAN-83236

The VM-Series firewall on Google Compute Platform does not publish firewall metrics to Google Stack Monitoring when you manually configure a DNS server IP address (Device > Setup > Services).

Workaround: The VM-Series firewall on Google Cloud Platform must use the DNS server that Google provides.

PAN-83215

SSL decryption based on ECDSA certificates does not work when you import the ECDSA private keys onto an nCipher nShield hardware security module (HSM).

PAN-81521

Endpoints failed to authenticate to GlobalProtect through Kerberos when you specify an FQDN instead of an IP address in the Kerberos server profile (Device > Server Profiles > Kerberos).

Workaround: Replace the FQDN with the IP address in the Kerberos server profile.

PAN-77125

PA-7000 Series, PA-5200 Series, and PA-3200 Series firewalls configured in tap mode don’t close offloaded sessions after processing the associated traffic; the sessions remain open until they time out.

Workaround: Configure the firewalls in virtual wire mode instead of tap mode, or disable session offloading by running the set session off load no CLI command.

PAN-75457

In WildFire appliance clusters that have three or more nodes, the Panorama management server does not support changing node roles. In a three-node cluster for example, you cannot use Panorama to configure the worker node as a controller node by adding the HA and cluster controller configurations, configure an existing controller node as a worker node by removing the HA configuration, and then commit and push the configuration. Attempts to change cluster node roles from Panorama results in a validation error—the commit fails and the cluster becomes unresponsive.

PAN-73530

The firewall does not generate a packet capture (pcap) when a Data Filtering profile blocks files.

PAN-73401

When you import a two-node WildFire appliance cluster into the Panorama management server, the controller nodes report their state as out-of-sync if either of the following conditions exist:

• You did not configure a worker list to add at least one worker node to the cluster. (In a two-node cluster, both nodes are controller nodes configured as an HA pair. Adding a worker node would make the cluster a three-node cluster.)
• You did not configure a service advertisement (either by enabling or not enabling advertising DNS service on the controller nodes).

Workaround: There are three possible workarounds to sync the controller nodes:

• After you import the two-node cluster into Panorama, push the configuration from Panorama to the cluster. After the push succeeds, Panorama reports that the controller nodes are in sync.
• Configure a worker list on the cluster controller: admin@wf500(active-controller)# set deviceconfig cluster mode controller worker-list <worker-ip-address> (<worker-ip-address> is the IP address of the worker node you are adding to the cluster.) This creates a three-node cluster. After you import the cluster into Panorama, Panorama reports that the controller nodes are in sync. When you want the cluster to have only two nodes, use a different workaround.
• Configure service advertisement on the local CLI of the cluster controller and then import the configuration into Panorama. The service advertisement can advertise that DNS is or is not enabled. admin@wf500(active-controller)# set deviceconfig cluster mode controller service-advertisement dns-service enabled yes or admin@wf500(active-controller)# set deviceconfig cluster mode controller service-advertisement dns-service enabled no Both commands result in Panorama reporting that the controller nodes are in sync.

PAN-70906

If the PAN-OS web interface and the GlobalProtect portal are enabled on the same IP address, then when a user logs out of the GlobalProtect portal, the administrative user is also logged out from the PAN-OS web interface.

Workaround: Use the IP address to access the PAN-OS web interface and an FQDN to access the GlobalProtect portal.

PAN-69505

When viewing an external dynamic list that requires client authentication and you Test Source URL, the firewall fails to indicate whether it can reach the external dynamic list server and returns a URL access error (Objects > External Dynamic Lists).

PAN-41558

When you use a firewall loopback interface as a GlobalProtect gateway interface, traffic is not routed correctly for third-party IPSec clients, such as strongSwan.

Workaround: Use a physical firewall interface instead of a loopback firewall interface as the GlobalProtect gateway interface for third-party IPSec clients. Alternatively, configure the loopback interface that is used as the GlobalProtect gateway to be in the same zone as the physical ingress interface for third-party IPSec traffic.

PAN-40079

The VM-Series firewall on KVM, for all supported Linux distributions, does not support the Broadcom network adapters for PCI pass-through functionality.

PAN-39636

Regardless of the Time Frame you specify for a scheduled custom report on a Panorama M-Series appliance, the earliest possible start date for the report data is effectively the date when you configured the report (Monitor > Manage Custom Reports). For example, if you configure the report on the 15th of the month and set the Time Frame to Last 30 Days, the report that Panorama generates on the 16th will include only data from the 15th onward. This issue applies only to scheduled reports; on-demand reports include all data within the specified Time Frame.

Workaround: To generate an on-demand report, click Run Now when you configure the custom report.

PAN-38255

When you perform a factory reset on a Panorama virtual appliance and configure the serial number, logging does not work until you reboot Panorama or execute the debug software restart process management-server CLI command.

PAN-31832

The following issues apply when configuring a firewall to use a hardware security module (HSM):

• nCipher nShield Connect—The firewall requires at least four minutes to detect that an HSM was disconnected, causing SSL functionality to be unavailable during the delay.
• SafeNet Network—When losing connectivity to either or both HSMs in an HA configuration, the display of information from the show high-availability state and show hsm info commands are blocked for 20 seconds.