561 lines
23 KiB
Markdown
561 lines
23 KiB
Markdown
---
|
|
type: Known
|
|
product: PAN-OS
|
|
version: 11.1.3
|
|
---
|
|
|
|
## PAN-304756
|
|
|
|
```caveat
|
|
This issue is now resolved. See PAN-OS 11.1.13-h1 Addressed Issues.
|
|
```
|
|
|
|
After you disable the shared optimization feature in Panorama, ensure that you perform a full configuration push to all managed multi-vsys devices to re-establish a baseline. Failure to include every device group associated with the multi-vsys device during this push might result in incomplete or inconsistent configurations across virtual systems.
|
|
|
|
## PAN-298505
|
|
|
|
```caveat
|
|
This issue is now resolved. See PAN-OS 11.1.6-h20 Addressed Issues, PAN-OS 11.1.10-h7 Addressed Issues, and PAN-OS 11.1.12 Addressed Issues
|
|
```
|
|
|
|
After upgrading multi-vsys firewalls, the sequence of the virtual system IDs (vsys ID) changes causing auto-commit failures with validation errors. This occurs when the multi-vsys firewall has virtual systems managed by Panorama, and the vsys ID sequence breaks when unused virtual systems are deleted and the changes are pushed to the firewall.
|
|
|
|
## PAN-294179
|
|
|
|
```caveat
|
|
This issue is now resolved. See PAN-OS 11.1.6-h17 Addressed Issues.
|
|
```
|
|
|
|
On the**Panorama Config Audit** page, some commit versions might display incorrect or missing data. Fields such as, **COMMITTED BY**, **COMMIT DATE**, and**OBJECT CHANGES** might not be visible for some commit versions. Sometimes, commit versions can disappear after a refresh and the commit description field might display corrupted characters.
|
|
|
|
## PAN-291288
|
|
|
|
An active firewall might unexpectedly reboot due to a pan_task crash caused by a page allocation failure. This issue is observed after a period of runtime with traffic and telemetry collection.
|
|
|
|
## PAN-290088
|
|
|
|
```caveat
|
|
This issue is now resolved. See PAN-OS 11.1.11 Addressed Issues
|
|
```
|
|
|
|
When pushing configurations from Panorama to a firewall, a memory leak might occur in the firewall's configd process, particularly when the configurations contain shared policies. Each configuration push causes the configd process to consume additional memory that is not released after the commit completes.
|
|
|
|
## PAN-289383
|
|
|
|
```caveat
|
|
PA-800 series firewalls only
|
|
```
|
|
|
|
Upgrading firewalls to PAN-OS 11.0 or later causes SFP ports to go non-operational when the firewall uses forced port mode and the connected peer device operates without auto-negotiation.
|
|
|
|
**Workaround:** Enable auto-negotiation on the connected peer firewall.
|
|
|
|
## PAN-288097
|
|
|
|
```caveat
|
|
This issue is now resolved. See PAN-OS 11.1.11 Addressed Issues
|
|
```
|
|
|
|
Routed process may stop responding after changing MTU or any link parameters when OSPF and PIM are enabled on the same interface.
|
|
|
|
## PAN-287871
|
|
|
|
```caveat
|
|
This issue affects PAN-OS 11.1.3-h2
|
|
```
|
|
|
|
When SSL Inbound Inspection is enabled and the firewall receives fragmented Client Hello packets that include the TCP timestamp option, the Client Hello message is forwarded to the destination server without the timestamp option.
|
|
|
|
## PAN-286231
|
|
|
|
```caveat
|
|
This issue is now resolved. See PAN-OS 11.1.11 Addressed Issues
|
|
```
|
|
|
|
When performing a partial **Commit and Push** on Panorama, there is a risk that unintended configuration changes might be pushed to a firewall.
|
|
|
|
This issue is more likely to occur in the following scenarios:
|
|
|
|
- When you run **Commit and Push** operations as a single action.
|
|
- When you trigger multiple parallel commit-all jobs at the same time.
|
|
- Device groups and templates have different configuration synchronization versions.
|
|
|
|
**Workaround:** Perform one of the following steps:
|
|
|
|
- Perform commit and push as two separate, sequential steps.
|
|
- Perform a full push instead of selective push.
|
|
|
|
## PAN-285894
|
|
|
|
If the Preserve Pre-NAT feature is enabled, dataplane crashes may occur, which could result in firewall reboots.
|
|
|
|
**Workaround:** Disable the Preserve Pre-NAT feature using the `set deviceconfig setting preserve-prenat-feature no` CLI command.
|
|
|
|
## PAN-283429
|
|
|
|
When you use custom certificates for the connection between Panorama and a log collector, the automated renewal for the predefined ElasticSearch certificates gets disrupted.
|
|
|
|
**Workaround**: Remove the custom certificates before the ElasticSearch certificates expire. This allows the system to correctly identify and renew the predefined ElasticSearch certificates. After the renewal is complete, re-install the custom certificates.
|
|
|
|
## PAN-281885
|
|
|
|
When exporting and importing the CSV file, the hash values of pre-shared key (PSK) variables set at template and template stack levels inconsistently change, resulting in both variables displaying the same hash value.
|
|
|
|
## PAN-280532
|
|
|
|
```caveat
|
|
This issue is now resolved. See PAN-OS 11.1.10 Addressed Issues.
|
|
```
|
|
|
|
When you use a single syslog server over TCP for log forwarding, and the connectivity to the syslog server breaks, syslog forwarding does not resume even after the connectivity to the server restores.
|
|
|
|
**Workaround:** Performing one of the following tasks:
|
|
|
|
- Reboot the firewall.
|
|
- Temporarily, configure syslog to use UDP, commit the configuration, revert to TCP, and then commit.
|
|
|
|
## PAN-280471
|
|
|
|
When applying filters or searching for logs in the **Panorama** > **Monitor** > **Logs**section, you might experience slow performance.
|
|
|
|
## PAN-279621
|
|
|
|
```caveat
|
|
This issue is now resolved. See PAN-OS 11.1.9 Addressed Issues.
|
|
```
|
|
|
|
Early aging and removal of firewall session while they are still active can lead to intermittent instabilities and crashes for proxy traffic, the Content and Threat detection engine, and any data-path processing.
|
|
|
|
## PAN-279415
|
|
|
|
```caveat
|
|
This issue is now resolved. See PAN-OS 11.1.11 Addressed Issues
|
|
```
|
|
|
|
Service routes configured for a data plane interface might incorrectly route traffic through the management plane interface instead. This issue impacts Syslog and CRL status traffic when the service route lacks a specific destination custom service route.
|
|
|
|
## PAN-278296
|
|
|
|
The system MAC address of the aggregate interface is the same on both the active and the passive devices, causing some packets to be sent incorrectly to the passive device. This is causing the AE interface on the active firewall to not come up.
|
|
|
|
## PAN-277417
|
|
|
|
```caveat
|
|
This issue is now resolved. See PAN-OS 11.1.9 Addressed Issues.
|
|
```
|
|
|
|
Memory leak issues can occur during the parsing of server certificates used for SSL Inbound Inspection, preventing the firewall from completing inspection.
|
|
|
|
## PAN-277034
|
|
|
|
```caveat
|
|
This issue is now resolved. See PAN-OS 11.1.10-h5 Addressed Issuesand PAN-OS 11.1.6-h19 Addressed Issues
|
|
```
|
|
|
|
WildFire reports might not fully display or be downloadable because some static resources fail to load.
|
|
|
|
## PAN-275601
|
|
|
|
```caveat
|
|
This issue is now resolved. See PAN-OS 11.1.10 Addressed Issues
|
|
```
|
|
|
|
When Panorama is not internet-connected and you try to upload images to the managed firewalls by using the **Validate** option, the upload fails with the following error: `Failed to create multi-upload job. No valid software deploy targets found.`
|
|
|
|
## PAN-273300
|
|
|
|
```caveat
|
|
This issue is now resolved. See PAN-OS 11.1.6-h1 Addressed Issues
|
|
```
|
|
|
|
When upgrading Panorama from PAN-OS 10.2 or PAN-OS 11.0 to PAN-OS 11.1 or a later release, Panorama fails to upgrade if it is operating within a Collector Group. The following error appears:`Error: Traceback (most recent call last):File "/opt/panrepo/releases/<PANOS release version>/validate"... (min ([dts['min'] for dts in 10g_type_intv_dir.values() if dts|'min']])-strftime ('%Y-%m-%d'),`
|
|
|
|
## PAN-265336
|
|
|
|
```caveat
|
|
(PAN-OS 11.1.3-h6 only)
|
|
```
|
|
|
|
Copper ports flap when generating a technical support file, executing telemetry, or retrieving port status using a Management Data Input/Output (MDIO) read.
|
|
|
|
## PAN-263987
|
|
|
|
```caveat
|
|
This issue is now resolved. See PAN-OS 11.1.4-h4 Addressed Issues.
|
|
```
|
|
|
|
When a NAT traversal (NAT-T or UDP encapsulation) IPSec tunnel is terminated on a Palo Alto Networks firewall and the NAT rule applied to the NAT-T IPSec tunnel is also on the same firewall, then the data traffic flowing through the NAT-T IPSec tunnel can't be NATed correctly.
|
|
|
|
## PAN-263940
|
|
|
|
On a PA-7500 Series firewall node in an NGFW cluster, if the data processing card is in slot 6, packet drops are expected.
|
|
|
|
## PAN-262287
|
|
|
|
Dereferencing a NULL pointer that occurs might cause pan_task processes to crash.
|
|
|
|
## PAN-260851
|
|
|
|
From the NGFW or Panorama CLI, you can override the existing application tag even if Disable Override is enabled for the application (**Objects** > **Applications**) tag.
|
|
|
|
## PAN-259769
|
|
|
|
```caveat
|
|
This issue is now resolved. See PAN-OS 11.1.3-h6 Addressed Issues
|
|
```
|
|
|
|
GlobalProtect portal is not accessible via a web browser and the app displays the error `ERR_EMPTY_RESPONSE`.
|
|
|
|
## PAN-259733
|
|
|
|
```caveat
|
|
This issue is now resolved. See PAN-OS 11.1.3-h2 Addressed Issues.
|
|
```
|
|
|
|
Custom reports created in PAN-OS are not deleted as expected, resulting in high memory use by the reportd process. This can lead to issues, such as out-of-memory conditions, content installation failures, and unexpected firewall reboots.
|
|
|
|
## PAN-257615
|
|
|
|
```caveat
|
|
This issue is now resolved. See PAN-OS 11.1.3-h4 Addressed Issues.
|
|
```
|
|
|
|
The Panorama web interface intermittently displays logs or fails to display logs completely.
|
|
|
|
## PAN-255868
|
|
|
|
```caveat
|
|
PA-3400 Series firewalls only
|
|
```
|
|
|
|
After enabling kernel data collection during a silent reboot, the firewall fails and reboots to maintenance mode.
|
|
|
|
**Workaround:** To recover the firewall, initiate a reboot from maintenance mode.
|
|
|
|
## PAN-255579
|
|
|
|
```caveat
|
|
This issue is now resolved. See PAN-OS 11.1.5 Addressed Issues.
|
|
```
|
|
|
|
Demo Mode and Log Forwarding: PA-7500 Series firewalls and Panorama display data plane logs after a delay.
|
|
|
|
## PAN-255285
|
|
|
|
```caveat
|
|
This issue is now resolved. See PAN-OS 11.1.5 Addressed Issues.
|
|
```
|
|
|
|
If only the HCSI-A link is connected on NGFW cluster nodes (the HSCI-B link is not connected) and the management interfaces goes down, the situation will result in a split brain.
|
|
|
|
## PAN-255116
|
|
|
|
```caveat
|
|
This issue is now resolved. See PAN-OS 11.1.5 Addressed Issues
|
|
```
|
|
|
|
When QoS is applied, traffic on an NGFW cluster node going from an MC-LAG interface to a destination stops when a member of the MC-LAG goes down.
|
|
|
|
## PAN-254927
|
|
|
|
```caveat
|
|
This issue is now resolved. See PAN-OS 11.1.5 Addressed Issues
|
|
```
|
|
|
|
Certain types of data packets sent to threat inspection processing on the Networking cards of PA-7500 Series firewalls cause a pan_task crash.
|
|
|
|
## PAN-254827
|
|
|
|
```caveat
|
|
This issue is now resolved. See PAN-OS 11.1.5 Addressed Issues
|
|
```
|
|
|
|
When you change an IP address on a management interface on any of the NGFW cluster nodes, there's no workflow in cluster-config to detect this change, so the subsequent commit-all will not push the updated management IP address.
|
|
|
|
**Workaround:** You must manually make an unrelated change to cluster-config in order for Panorama to detect this change; the subsequent commit-all will push the cluster-config with the updated management IP address to cluster-manager.
|
|
|
|
## PAN-254351
|
|
|
|
```caveat
|
|
This issue is now resolved. See PAN-OS 11.1.5 Addressed Issues
|
|
```
|
|
|
|
An NGFW cluster node could get stuck in suspended state in some cases when you use GRE tunnel termination with keepalive enabled on both ends.
|
|
|
|
## PAN-254240
|
|
|
|
In the event of an HSCI flap on an NGFW cluster node, traffic reconvergence takes three to four seconds.
|
|
|
|
## PAN-253963
|
|
|
|
The auto commit job may take longer than expected to complete when the Panorama management server is in Panorama or Log Collector mode.
|
|
|
|
## PAN-253466
|
|
|
|
```caveat
|
|
This issue is now resolved. See PAN-OS 11.1.5 Addressed Issues
|
|
```
|
|
|
|
In the event of a cluster manager restart on the leader node of an NGFW cluster, traffic stops because the state machine transitions to unknown and the leader is not changing.
|
|
|
|
## PAN-253466
|
|
|
|
```caveat
|
|
This issue is now resolved. See PAN-OS 11.1.5 Addressed Issues
|
|
```
|
|
|
|
On an NGFW cluster node, an expected packet buffer leak occurs with FTP/SIP traffic over an extended period of time.
|
|
|
|
## PAN-252358
|
|
|
|
```caveat
|
|
PA-7500 Series firewalls only
|
|
```
|
|
|
|
In the event of a corosync restart, an NGFW cluster node goes to failed state.
|
|
|
|
## PAN-251639
|
|
|
|
```caveat
|
|
This issue is now resolved. See PAN-OS 11.1.4 Addressed Issues.
|
|
```
|
|
|
|
When a Wildfire Analysis security profile is enabled, an out of memory condition might occur due to a memory leak in the `varrcvr` process.
|
|
|
|
## PAN-251551
|
|
|
|
```caveat
|
|
PA-7500 Series firewalls only
|
|
```
|
|
|
|
When an NGFW cluster agent crashes and doesn't recover, leader election will take approximately 45 seconds to begin and traffic failover will occur during that time.
|
|
|
|
## PAN-251501
|
|
|
|
```caveat
|
|
This issue is now resolved. See PAN-OS 11.1.5 Addressed Issues
|
|
```
|
|
|
|
Upon a reboot, an NGFW cluster node will occasionally fail to rejoin a cluster due to a timing issue.
|
|
|
|
## PAN-250903
|
|
|
|
```caveat
|
|
PA-7500 Series firewalls only
|
|
```
|
|
|
|
In a congestion scenario on an HSCI port of an NGFW cluster node, the QoS priorities of cross node traffic streams might be reversed if you're using the default QoS profile with class1 to class8 set as high to low.
|
|
|
|
## PAN-250062
|
|
|
|
```caveat
|
|
This issue is now resolved. See PAN-OS 11.1.4-h4 Addressed Issues.
|
|
```
|
|
|
|
Device telemetry might fail at configured intervals due to bundle generation issues.
|
|
|
|
## PAN-250043
|
|
|
|
```caveat
|
|
This issue is now resolved. See PAN-OS 11.1.5 Addressed Issues
|
|
```
|
|
|
|
On an NGFW cluster node, if you configure a QoS interface with an Egress Max (Mbps) that exceeds 68000, the operation will fail with a message indicating "...is not a valid reference.…" The QoS Max bandwidth on any interface cannot be configured to be more than 68000.
|
|
|
|
## PAN-249727
|
|
|
|
```caveat
|
|
This issue is now resolved. See PAN-OS 11.1.5 Addressed Issues
|
|
```
|
|
|
|
On an NGFW cluster node, the Custom/Pre-defined URL category is not part of the session flow data and a promoted session after failover does not include it.
|
|
|
|
## PAN-248762
|
|
|
|
```caveat
|
|
This issue is now resolved. See PAN-OS 11.1.5 Addressed Issues
|
|
```
|
|
|
|
A firewall using the Advanced Routing Engine configured with OSPF crashes when connecting to the neighbor while exchanging route maps.
|
|
|
|
## PAN-247974
|
|
|
|
```caveat
|
|
PA-7500 Series firewalls only
|
|
```
|
|
|
|
LACP flap is expected during a device failover in an NGFW cluster due to an L2 ctrld restart on the new leader node.
|
|
|
|
## PAN-240529
|
|
|
|
```caveat
|
|
PA-7500 Series firewalls only
|
|
```
|
|
|
|
Cloud application information is missing from traffic logs on NGFW cluster nodes.
|
|
|
|
## PAN-237106
|
|
|
|
```caveat
|
|
This issue is now resolved. See PAN-OS 11.1.8 Addressed Issues
|
|
```
|
|
|
|
LSVPN satellite certificates may be generated with serial numbers exceeding 40 hexadecimal characters. This causes certificate revocation and deletion operations to fail with the following error messages:
|
|
|
|
- `db-serialno can be at most 40 characters`
|
|
- `db-serialno is invalid`
|
|
|
|
**Workaround:**
|
|
|
|
To resolve this issue, use the following CLI commands with the LSVPN satellite serial number to manually delete or revoke the affected certificates:
|
|
|
|
**Delete certificate information**:`delete sslmgr-store certificate-info portal name <name> serialno <satellite_serial>`
|
|
|
|
**Revoke satellite certificates**:`delete sslmgr-store satellite-info-revoke-certificate portal <name> serialno <list_of_satellite_serials>`
|
|
|
|
## PAN-234015
|
|
|
|
The X-Forwarded-For (XFF) value is not displayed in traffic logs.
|
|
|
|
## PAN-227978
|
|
|
|
```caveat
|
|
This issue is now resolved. See PAN-OS 11.1.5 Addressed Issues
|
|
```
|
|
|
|
The UI widget does not accurately list the status of the port when NGFW clustering is enabled.
|
|
|
|
## PAN-224502
|
|
|
|
The autocommit time of the VM-Series firewall running PAN-OS 11.1.0 might take longer than expected.
|
|
|
|
## PAN-220180
|
|
|
|
Configured botnet reports (**Monitor** > **Botnet**) are not generated.
|
|
|
|
## PAN-207733
|
|
|
|
When a DHCPv6 client is configured on HA Active/Passive firewalls, if the DHCPv6 server goes down, after the lease time expires, the DHCPv6 client should enter SOLICIT state on both the Active and Passive firewalls. Instead, the client is stuck in BOUND state with an IPv6 address having lease time 0 on the Passive firewall.
|
|
|
|
## PAN-207611
|
|
|
|
When a DHCPv6 client is configured on HA Active/Passive firewalls, the Passive firewall sometimes crashes.
|
|
|
|
## PAN-207442
|
|
|
|
For M-700 appliances in an active/passive high availability (**Panorama** > **High Availability**) configuration, the `active-primary` HA peer configuration sync to the `secondary-passive` HA peer may fail. When the config sync fails, the job Results is `Successful` (**Tasks**), however the sync status on the **Dashboard** displays as `Out of Sync` for both HA peers.
|
|
|
|
**Workaround**: Perform a local commit on the `active-primary` HA peer and then synchronize the HA configuration.
|
|
|
|
1. [Log in to the Panorama web interface](https://docs.paloaltonetworks.com/panorama/11-0/panorama-admin/set-up-panorama/access-and-navigate-panorama-management-interfaces/log-in-to-the-panorama-web-interface) of the `active-primary` HA peer.
|
|
2. Select **Commit** and **Commit to Panorama**.
|
|
3. In the `active-primary` HA peer **Dashboard**, click **Sync to Peer** in the High Availability widget.
|
|
|
|
## PAN-207040
|
|
|
|
If you disable Advanced Routing, remove logical routers, and downgrade from PAN-OS 11.0.0 to a PAN-OS 10.2.x or 10.1.x release, subsequent commits fail and SD-WAN devices on Panorama have no Virtual Router name.
|
|
|
|
## PAN-206909
|
|
|
|
The Dedicated Log Collector is unable to reconnect to the Panorama management server if the `configd` process crashes. This results in the Dedicated Log Collector losing connectivity to Panorama despite the managed collector connection `Status` (**Panorama** > **Managed Collector**) displaying `connected` and the managed colletor `Health` status displaying as healthy.
|
|
|
|
This results in the local Panorama config and system logs not being forwarded to the Dedicated Log Collector. Firewall log forwarding to the disconnected Dedicated Log Collector is not impacted.
|
|
|
|
**Workaround:** Restart the `mgmtsrvr` process on the Dedicated Log Collector.
|
|
|
|
1. [Log in to the Dedicated Log Collector CLI](https://docs.paloaltonetworks.com/panorama/11-0/panorama-admin/set-up-panorama/access-and-navigate-panorama-management-interfaces/log-in-to-the-panorama-cli).
|
|
2. Confirm the Dedicated Log Collector is disconnected from Panorama.
|
|
`admin>``show panorama-status`
|
|
Verify the `Connected` status is `no`.
|
|
3. Restart the `mgmtsrvr` process.
|
|
`admin>``debug software restart process management-server`
|
|
|
|
## PAN-197588
|
|
|
|
The PAN-OS ACC (Application Command Center) does not display a widget detailing statistics and data associated with vulnerability exploits that have been detected using inline cloud analysis.
|
|
|
|
## PAN-197419
|
|
|
|
```caveat
|
|
PA-1400 Series firewalls only
|
|
```
|
|
|
|
In **Network** > **Interface** > **Ethernet**, the power over Ethernet (PoE) ports do not display a **Tag** value.
|
|
|
|
## PAN-196758
|
|
|
|
On the Panorama management server, pushing a configuration change to firewalls leveraging SD-WAN erroneously show the auto-provisioned BGP configurations for SD-WAN as being edited or deleted despite no edits or deletions being made when you **Preview Changes** (**Commit** > **Push to Devices** > **Edit Selections** or **Commit** > **Commit and Push** > **Edit Selections**).
|
|
|
|
## PAN-195968
|
|
|
|
```caveat
|
|
PA-1400 Series firewalls only
|
|
```
|
|
|
|
When using the CLI to configure power over Ethernet (PoE) on a non-PoE port, the CLI prints an error depending on whether an interface type was selected on the non-PoE port or not. If an interface type, such as tap, Layer 2, or virtual wire, was selected before PoE was configured, the error message will not include the interface name (eg. ethernet1/4). If an interface type was not selected before PoE was configured, the error message will include the interface name.
|
|
|
|
## PAN-194978
|
|
|
|
```caveat
|
|
PA-1400 Series firewalls only
|
|
```
|
|
|
|
In **Network** > **Interface** > **Ethernet**, hovering the mouse over a power over Ethernet (PoE) **Link State** icon does not display link speed and link duplex details.
|
|
|
|
## PAN-187685
|
|
|
|
On the Panorama management server, the Template Status displays no synchronization status (**Panorama** > **Managed Devices** > **Summary**) after a bootstrapped firewall is successfully added to Panorama.
|
|
|
|
**Workaround:** After the bootstrapped firewall is successfully added to Panorama, [log in to the Panorama web interface](https://docs.paloaltonetworks.com/panorama/10-2/panorama-admin/set-up-panorama/access-and-navigate-panorama-management-interfaces/log-in-to-the-panorama-web-interface.html) and select **Commit** > **Push to Devices**.
|
|
|
|
## PAN-187407
|
|
|
|
The configured Advanced Threat Prevention inline cloud analysis action for a given model might not be honored under the following condition: If the firewall is set to **Hold client request for category lookup**and the action set to **Reset-Both** and the URL cache has been cleared, the first request for inline cloud analysis will be bypassed.
|
|
|
|
## PAN-186283
|
|
|
|
Templates appear out-of-sync on Panorama after successfully deploying the CFT stack using the Panorama plugin for AWS.
|
|
|
|
**Workaround**: Use **Commit** > **Push to Devices** to synchronize the templates.
|
|
|
|
## PAN-184708
|
|
|
|
```caveat
|
|
Panorama managed firewalls
|
|
```
|
|
|
|
Scheduled report emails (**Monitor** > **PDF Reports** > **Email Scheduler**) are not emailed if:
|
|
|
|
- A scheduled report email contains a Report Group (**Monitor** > **PDF Reports** > **Report Group**) which includes a SaaS Application Usage report.
|
|
- A scheduled report contains only a SaaS Application Usage Report.
|
|
|
|
**Workaround:** To receive a scheduled report email for all other PDF report types:
|
|
|
|
1. Select **Monitor** > **PDF Reports** > **Report Groups** and remove all SaaS Application Usage reports from all Report Groups.
|
|
2. Select **Monitor** > **PDF Reports** > **Email Scheduler** and edit the scheduled report email that contains only a SaaS Application Usage report. For the Recurrence, select **Disable** and click **OK**.
|
|
Repeat this step for all scheduled report emails that contain only a SaaS Application Usage report.
|
|
3. **Commit**.
|
|
() Select **Commit** > **Commit and Push**
|
|
|
|
## PAN-184406
|
|
|
|
Using the CLI to add a RAID disk pair to an M-700 appliance causes the dmdb process to crash.
|
|
|
|
**Workaround:** Contact customer support to stop the dmdb process before adding a RAID disk pair to a M-700 appliance.
|
|
|
|
## PAN-183404
|
|
|
|
Static IP addresses are not recognized when "and" operators are used with IP CIDR range.
|
|
|
|
## PAN-181933
|
|
|
|
If you use multiple log forwarding cards (LFCs) on the PA-7000 series, all of the cards may not receive all of the updates and the mappings for the clients may become out of sync, which causes the firewall to not correctly populate the Source User column in the session logs.
|
|
|
|
## PAN-164885
|
|
|
|
```caveat
|
|
This issue is now resolved. See PAN-OS 11.1.5 Addressed Issues
|
|
```
|
|
|
|
On the Panorama management server, pushes to managed firewalls (**Commit** > **Push to Devices** or **Commit and Push**) may fail when an EDL (**Objects** > **External Dynamic Lists**) is configured to **Check for updates** every 5 minutes due to the commit and EDL fetch processes overlapping. This is more likely to occur when multiple EDLs are configured to check for updates every 5 minutes.
|