310 lines
11 KiB
Markdown
310 lines
11 KiB
Markdown
---
|
|
type: Addressed
|
|
product: PAN-OS
|
|
version: 11.1.6-h14
|
|
---
|
|
|
|
## PAN-290996
|
|
|
|
Fixed an issue where SNMP walks returned a value of 0 for the CPS (Connections Per Second) per vsys on firewalls after upgrading to PAN-OS 11.1.6-h3, even when active connections were present.
|
|
|
|
## PAN-290803
|
|
|
|
```caveat
|
|
VM-Series firewalls on Microsoft Azure environments only
|
|
```
|
|
|
|
Fixed an issue where firewall failed to bootstrap with a custom image, and VM-Series plugin information was not displayed in the system information.
|
|
|
|
## PAN-290239
|
|
|
|
```caveat
|
|
PA-455 firewalls in active/passive HA configurations only
|
|
```
|
|
|
|
Fixed an issue where, after an upgrade, the TCP session for syslog forwarding did not resume after the syslog server service was disabled and then re-enabled, which caused logs to be dropped. This occurred when the syslog server was down for more than 16 minutes.
|
|
|
|
## PAN-290088
|
|
|
|
Fixed an issue where a memory leak occurred related to the configd process when pushing configurations from Panorama to a firewall. This occurred when the configurations contained shared policy rules.
|
|
|
|
## PAN-289102
|
|
|
|
```caveat
|
|
PA-7500 Series, PA-5410, PA-5420, PA-5430, PA-5440, PA-5445, PA-3400 Series, PA-1400 Series, PA-400 Series, VM-Series, and CN-Series firewalls only
|
|
```
|
|
|
|
Fixed a race condition issue related to predict processing, which resulted in a dataplane restart and traffic loss.
|
|
|
|
## PAN-288893
|
|
|
|
```caveat
|
|
Firewalls in multi-vsys configurations only
|
|
```
|
|
|
|
Fixed an issue where HTTP/2 traffic failed due when one virtual system (vsys) had a decryption policy rule enabled and another vsys had a no-decrypt policy rule for the same session.
|
|
|
|
## PAN-287818
|
|
|
|
Fixed an issue where sessions timed out sooner than expected due to the pan_proxy_accumulation_restore_timeout not initiating when the accumulation session_init failed.
|
|
|
|
## PAN-287734
|
|
|
|
Fixed an issue where **Scan ERR: Internal Err 1002** messages were unexpectedly generated when WIF shared memory use was high.
|
|
|
|
## PAN-287621
|
|
|
|
Added debug logs for an issue where a slow IP address pool NAT leak occurred when persistent NAT was enabled, which led to NAT IP pool exhaustion.
|
|
|
|
## PAN-287056
|
|
|
|
Fixed an issue where BGP export policy rules with next-hop matching failed to block the advertisement of static routes, and the firewall incorrectly matched the egress interface IP address instead of the original next-hop IP address of the static route, which caused the deny rule to fail.
|
|
|
|
## PAN-287023
|
|
|
|
Fixed an issue where a large number of logs caused the logrcvr process to stop responding.
|
|
|
|
## PAN-287002
|
|
|
|
A fix was made to address [CVE-2025-0133](https://security.paloaltonetworks.com/CVE-2025-0133).
|
|
|
|
## PAN-286857
|
|
|
|
Fixed an issue where only failed Kerberos authentication events were logged in auth.log, and successful authentication events were not logged.
|
|
|
|
## PAN-286848
|
|
|
|
Fixed an issue where ECMP incorrectly balanced sessions across links based on the configured metric, which led to an imbalance in traffic distribution and resulted in traffic assignment shifting disproportionately to routes with lower metrics.
|
|
|
|
## PAN-286443
|
|
|
|
Fixed an issue where, after an upgrade, the firewall was unable to be managed via HTTPS or SSH.
|
|
|
|
## PAN-286306
|
|
|
|
Fixed an issue where, when getting transceiver information from ESCC for SFP 25G modules, the transceiver code was incorrectly updated with Unknown instead of 25GBase-SR.
|
|
|
|
## PAN-285894
|
|
|
|
Fixed an issue where the all_task process stopped responding, which caused the firewall to reboot unexpectedly, and traffic failures occurred.
|
|
|
|
## PAN-285818
|
|
|
|
Fixed an issue where a tool was needed to display leaked NAT port numbers without requiring a forced synchronization.
|
|
|
|
## PAN-284908
|
|
|
|
Fixed an issue where retrieving filenames from OneDrive resulted in a cache miss.
|
|
|
|
## PAN-284073
|
|
|
|
Fixed an issue on the firewall that caused commits to fail and the web interface to become inaccessible.
|
|
|
|
## PAN-284067
|
|
|
|
Fixed an issue where the devsrvr process experienced out of memory (OOM) conditions due to the show running application statistics CLI command, which caused the firewall to reboot.
|
|
|
|
## PAN-284003
|
|
|
|
Fixed an issue where clients did not receive a valid response when when searching a website due to a compression error.
|
|
|
|
## PAN-283979
|
|
|
|
Fixed an issue where the firewall became non-functional due to high root partition use.
|
|
|
|
## PAN-283936
|
|
|
|
```caveat
|
|
Panorama appliances only
|
|
```
|
|
|
|
Fixed an issue where the configd process intermittently restarted, which caused Panorama to be temporarily unavailable.
|
|
|
|
## PAN-283331
|
|
|
|
Fixed an issue where selective pushes to managed devices failed when the **User ID Master Device** was configured.
|
|
|
|
## PAN-282359
|
|
|
|
Fixed an issue where the Panorama web interface was slower than expected.
|
|
|
|
## PAN-282277
|
|
|
|
Fixed an issue where an OOM condition on the logrcvr process caused interface flapping, and the interface unexpectedly went down and then recovered without intervention.
|
|
|
|
## PAN-281509
|
|
|
|
```caveat
|
|
Panorama appliances only
|
|
```
|
|
|
|
Fixed an issue where log exports were slower than expected or failed when filtering logs after an upgrade, which resulted in timeouts or delays in displaying logs on the web interface.
|
|
|
|
## PAN-280532
|
|
|
|
Fixed an issue where, after disabling and re-enabling the external syslog server, the TCP session was not resumed, which caused all logs that were forwarded to the syslog server to be dropped.
|
|
|
|
## PAN-280101
|
|
|
|
Fixed an issue where set and edit commands took longer than expected when adding address objects with a large number of dynamic groups due to the completion cache being enabled. With this fix, the completion cache is disabled by default.
|
|
|
|
## PAN-279500
|
|
|
|
Fixed an issue where TLS connections failed to establish in asymmetric routing environments if the firewall did not see server-to-client (s2c) packets of the TLS handshake.
|
|
|
|
To use this fix, run the following CLI command: debug dataplane set ssl-decrypt accumulate-client-hello asym-disable yes.
|
|
|
|
## PAN-278836
|
|
|
|
Fixed an issue where, after an upgrade, GlobalProtect attempted to use the embedded browser instead of the default browser for gateway authentication even when it was configured to use the default browser.
|
|
|
|
## PAN-278812
|
|
|
|
Fixed an issue where authentication to GlobalProtect failed with the error message User not in allowed list.
|
|
|
|
## PAN-278190
|
|
|
|
Fixed an issue on Panorama where a scheduled report with SLS data had an invalid translated-query.
|
|
|
|
## PAN-278150
|
|
|
|
Fixed an issue where the firewall removed the Authentication Key Identifier (AKID) from the certificate during SSL decryption, which caused Python 3.13 to fail with a certificate verification error.
|
|
|
|
## PAN-277751
|
|
|
|
Fixed an issue where a policy-based forwarding (PBF) rule with an action of **no-pbf** and a service of TCP-22 did not match traffic after upgrading to PAN-OS 11.1.5-h1. As a result, traffic was matched by a lower rule with a service of **any** and an action of **forward**.
|
|
|
|
## PAN-276920
|
|
|
|
Fixed an issue where web-advertisement traffic was not immediately blocked which resulted in pages loading indefinitely.
|
|
|
|
## PAN-276862
|
|
|
|
Fixed an issue on Panorama where the logd process stopped responding unexpectedly.
|
|
|
|
## PAN-276616
|
|
|
|
Fixed an issue on the firewall where half-duplex settings on Ethernet was not visible.
|
|
|
|
## PAN-276276
|
|
|
|
```caveat
|
|
PA-450 firewalls only
|
|
```
|
|
|
|
Fixed an issue where, after an upgrade, data that was excluded using the query builder in a custom report was still visible in the report, and the logs displayed errors related to invalid threat names being queried.
|
|
|
|
## PAN-275133
|
|
|
|
Fixed an issue where HTTP 503 server errors occurred while browsing websites due to slow Secure Web Gateway (SWG) bypass rule lookup.
|
|
|
|
## PAN-275047
|
|
|
|
```caveat
|
|
VM-Series firewalls only
|
|
```
|
|
|
|
Fixed an issue where, after an upgrade, the firewall was unable to send logs to the Strata Logging Service (SLS) when using a specific proxy server, and the SSL connection status displayed as failed when attempting to forward logs through the web proxy.
|
|
|
|
## PAN-273964
|
|
|
|
Fixed an issue where SNMP scans to a firewall timed out after upgrading to a PAN-OS 10.2 release.
|
|
|
|
## PAN-273727
|
|
|
|
Fixed an issue where the firewall skipped the DNS policy rule of a domain external dynamic list (EDL) during an EDL refresh.
|
|
|
|
To use this fix, run the following CLI command and commit: set deviceconfig setting ctd custom-edl-domains-continuous-reload yes/no
|
|
|
|
## PAN-271810
|
|
|
|
Fixed an issue where auto-negotiation advertised and negotiated 10/100 half and full duplex.
|
|
|
|
## PAN-271490
|
|
|
|
Fixed an issue on the firewall that caused the following error message to be displayed: frr_ns0: failed to stop child frr_ns0_ospf6d.
|
|
|
|
## PAN-271432
|
|
|
|
Fixed an issue where the firewall was unable to decrypt SSL traffic when using forward proxy and HSM with an ECDSA signing certificate.
|
|
|
|
## PAN-271215
|
|
|
|
A fix was made to address [CVE-2025-4230](https://security.paloaltonetworks.com/CVE-2025-4230).
|
|
|
|
## PAN-269700
|
|
|
|
Fixed an issue where commits to service connection firewalls from Panorama failed.
|
|
|
|
## PAN-269057
|
|
|
|
Fixed an issue where the routed process stopped responding due to accessing freed memory from a hash table when the route vectors were resized. This occurred when a large number of static routes were configured.
|
|
|
|
## PAN-268922
|
|
|
|
```caveat
|
|
PA-3220 firewalls in high availability (HA) configurations only
|
|
```
|
|
|
|
Fixed an intermittent issue where the firewalls went out of sync after a configuration push from Panorama.
|
|
|
|
## PAN-268787
|
|
|
|
Fixed an issue where users were unable to log in to Panorama and the following error message was displayed: Timed out while getting config lock. Please try again. This occurred when pushing configurations to a large number of devices.
|
|
|
|
## PAN-268708
|
|
|
|
Fixed an issue where PDF summary and email reports displayed IPv6 addresses instead of IPv4 addresses.
|
|
|
|
## PAN-268680
|
|
|
|
Fixed an issue where the configd process stopped responding when a configuration merge operation changed.
|
|
|
|
## PAN-267759
|
|
|
|
Fixed an issue where Prisma Access gateway downloads were slower than expected.
|
|
|
|
## PAN-267614
|
|
|
|
Fixed an issue where the Panorama web interface was slower than expected due to high CPU utilization on the mongodb process.
|
|
|
|
## PAN-267328
|
|
|
|
Fixed an issue where the all_task process stopped responding, which caused the firewall to stop processing traffic.
|
|
|
|
## PAN-267045
|
|
|
|
Fixed an issue on the firewall where ICMP ping loss occurred after installing a Network Processing Card (NPC) in slot 7.
|
|
|
|
## PAN-265549
|
|
|
|
A fix was made to address [CVE-2025-0137](https://security.paloaltonetworks.com/CVE-2025-0137).
|
|
|
|
## PAN-265014
|
|
|
|
Fixed an issue where changes made to device groups with the same prefix name were not visible in the commit scope.
|
|
|
|
## PAN-264845
|
|
|
|
Fixed an issue where the Log Forwarding for Security Services feature did not correctly filter policy rules with log forwarding profiles.
|
|
|
|
## PAN-263749
|
|
|
|
Fixed an issue where disk space that was used by file descriptors was not freed, which caused the root partition to become full and Panorama to be inaccessible.
|
|
|
|
## PAN-260564
|
|
|
|
Fixed an issue on firewalls in HA configurations where a network loop was detected by switches after suspending HA on the active firewall.
|
|
|
|
## PAN-260279
|
|
|
|
Fixed an issue where selective push operations failed with the error message: Failed to generate selective push configuration. Schema validation failed. Please try a full push.
|
|
|
|
## PAN-255020
|
|
|
|
Fixed an issue where the Panorama web interface did not display the push scope data for custom admin users when performing a partial commit and push.
|
|
|
|
## PAN-226184
|
|
|
|
Fixed an issue where push operations from Panorama were slow due to the rasmgr process taking longer than expected.
|